Cocoon 400
4. PERSONALISATION
4.1 ADJUSTING SPEAKER VOLUME
There are two ways to set the speaker volume:
4.1.1 Speaker volume during call
During conversation, press the 
or 
key to change the volume accordingly
Note: The handsfree volume is also adjusted together with the receiver in the handset as
described above!
4.2ADJUSTING RING VOLUME 4.2.1 Handset ring
You can adjust the ring volume during a incoming call by pressing the Up 
or Down 
keys. The default ring volume can be set as follows:
1. Enter the menu by pressing MENU.
2. Select HANDSET using the 
and 
keys.
3. Press OK.
4. Select VOLUME using the 
and 
keys.
5. Press OK.
6. Select the desired volume OFF or 1 to 5).
7. Press OK to confirm or 
to return to the previous menu.
Note: Every setting is confirmed at the end by a double or single long beep. A double bleep
confirms the validation of your choice.
A long bleep signifies that the modification has not been taken into account.
4.2.2 Base ring
1.Enter the menu by pressing MENU.
2.Select BASE.
3.Press OK.
4.Select UNPROTEC.
5.Press OK.
6.Select VOLUME.
7.Press OK.
8.Select the desired volume (OFF or 1 to 5) by means of the Up 
and Down 
keys.
9.Press OK to confirm or 
to return to the previous menu.
A double bleep confirms the validation of your choice.
A long bleep that the modification has not been taken into account.
ENGLISH
73