Chapter 2: Installation
Connecting your conference phone
Connect the Connection cable from the Link Out jack on the base unit to the Link In jack on the conferencing pod (see figure 2.1).
Figure 2.1 Connecting the MAX IP Response Point 
Warning: DO NOT plug a laptop or PC into the Link Out jack on the base unit or conferencing pod as severe electrical damage could occur.
Connect the base unit to the Ethernet jack using the Ethernet cable.
Connect the power cord to the base unit and plug it directly into an electrical outlet.
Connecting Additional MAX IP Response Point Phones
Connect the 12’ Connection cable to the Link Out jack on the first phone and to the Link In jack on the second phone (see figure 2.2).
| From Link Out |
|
25' Connection cable To Link In | 12' Connection cable | To Link In |
|
To Link Out on Base Unit
Figure 2.2 Connecting additional units
Continue linking additional MAX IP Response Point phones in the same fashion. A total of four units may be connected.
4 Technical Services: