Park/Pickup Key Configuration
The programmable method of configuration creates park and pickup keys that you can configure on the 6757i CT phone.
You can set a key as "Park" or "Pickup" and then:
•specify a customized label to display on the Phone UI
•specify a value
•specify which line to use
•specify the state of the park and/or pickup keys
On the IP phone UI, the Park/Pickup feature displays the following:
•When a call comes in, and you pickup the handset, the custom label that you configured for the Park key displays on the Phone UI.
•After the call is parked, the label that you configured for the Pickup key displays on other phones in the network. You can then press the "Pickup" key, followed by the applicable value to pickup the call on another phone in your network.
You can configure a Park and Pickup programmable configuration using the Aastra Web UI.
Key Configuration Using the Aastra Web UI
On the 6757i CT, you configure a Park and/or Pickup key at
Note: Applicable values depend on the server in your network (Asterisk, BroadWorks, Sylantro, ININ PBX. See the table “Park/Pickup Call Server Configuration Values” on page 113.
Configuring Park/Pickup using Key Configuration
Use the following procedure to configure the Park/Pickup call feature using the key configuration method.
Aastra Web UI
Use the following procedure to configure a Park/Pickup key on the 6757i CT IP Phone. The procedure shows the softkey screen as an example.
Note: For values to enter in the “Value” fields, see the table “Park/Pickup Call
Server Configuration Values” on page 113.
Line Keys and Softkeys
Model 6757i CT IP Phone User Guide | 115 |