Managing Calls
4. Click on Basic Settings->Account Configuration.
5.For each account, enable DND by placing a check mark in the box. Disable DND by unchecking the box.
Notes:
1. If you selected “Account” or “Custom” mode in step 2, you can enable/disable each account or all accounts as applicable. If you selected “Phone” mode, the first account allows you to change the DND status for all accounts.
2.Number and name of accounts that display to this screen are dependant on the number and name of accounts configured on the phone. In the screen in step 4, Screenname1 is configured on Line 1, Screenname2 is configured on Line 2, and Screenname3 is configured on Line 3. Only your Administrator can create accounts for your phone. Contact your Administrator for more information.
6.Click to save your changes. The changes takes affect immediately without a reboot.
Using DND Modes via the IP Phone UI
After you add a DND key to your phone, you can toggle the DND state using this key on the phone. Use the following procedure to enable/disable DND on the IP Phone.
IP Phone UI
The following procedures assume you have already configured a DND key AND assumes there are three accounts configured on the phone.
Notes:
1. If there is no DND key configured or if it is removed, DND is disabled on the IP Phone.
2.If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if the mode was set to “Phone”.
3.Using the Aastra Web UI, if you change the DND key mode to “phone”, all accounts synchronize to the current setting of Account 1.
190 | Model 6757i CT IP Phone User Guide |