2.Select from “Key 1” through “Key 10” on the Top keys. or
Select from "Key 1" through "Key 20" on the Bottom keys.
3.In the "Type" field, select Paging.
4.In the “Label” field, enter a label to apply to this key.
5.In the “Value” field, enter a multicast IP address and a port number for the Paging key. When you press this key, the phone initiates an outgoing multicast RTP session to the specified address using the specified port. (For example, 239.0.1.15:10000).
Notes:
1. When you select Paging for the “Type” field, the “Line” field is disabled.
2.The “Value” field allows for one multicast address entry only.
6.To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the path, Basic
Expansion Module Keys
7.Select from “Key 1” through “Key 36” (M670i) or
Select from “Key 1” through “Key 60” (M675i)
8.In the "Type" field, select Paging.
9.(M675i) In the “Label” field, enter a label to apply to this key.
10.In the “Value” field, enter a multicast IP address and a port number for the Paging key. When you press this key, the phone initiates an outgoing multicast RTP session to the specified address using the specified port. (For example, 239.0.1.15:10000).
Notes:
1. When you select Paging for the “Type” field, the “Line” field is disabled.
2.The “Value” field allows for one multicast address entry only.
11.To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the path, Basic
12.Click to save your changes
Line Keys and Softkeys
Model 6757i CT IP Phone User Guide | 145 |