Additional Features
Preferred Line and Preferred Line Timeout
The 6757i CT has a feature called “preferred line” and “preferred line timeout”. If you enable the preferred line parameter on your phone, after a call ends (incoming or outgoing), the display switches back to the preferred line. Next time you go
Note: You can configure “Preferred Line” and “Preferred Line Timeout” using the Aastra Web UI only.
The following table provides the behavior of the preferred line focus feature with other features on the phone.
Phone Feature | Preferred Line Behavior |
|
|
call return | The phone switches back to the focused line immediately after |
| the call ends. |
speeddial | The line is already specified when the speeddial is created. The |
| phone switches back immediately after the call ends. |
conference | For incoming calls, the phone switches back immediately after |
| the call ends. |
transfer | For incoming or outgoing calls, the current behavior is that the |
| same line used to transfer the call does not change. For incoming |
| calls, the phone switches back immediately after the call |
| transfers. |
|
|
blf | The phone switches back immediately after the call ends. |
|
|
park | The phone switches back immediately after the call ends. |
|
|
voicemail | The phone switches back immediately after the call ends. |
|
|
redial | The phone switches back immediately after the call ends. |
|
|
dialing | For incomplete dialing on a |
| change if some digits are entered. |
| If no digits are entered or digits were cleared, the focus changes |
| to preferred line after the time out has passed without activities. |
caller id | If the "Switch UI Focus To Ringing Line" parameter is disabled, |
| the User is able to see the Caller ID when the phone switches the |
| focus to the ringing line. |
|
|
factory default | Factory default and recovery mode clears the "preferred line" and |
| "preferred line timeout" parameters, and the phone operates in a |
| |
|
|
254 | Model 6757i CT IP Phone User Guide |