Display DTMF Digits
A feature on the 6757i CT phone allows users to enable or disable DTMF
DTMF is the signal sent from the phone to the network that you generate when you press the phone’s touch keys. This is also known as “touchtone” dialing. Each key you press on your phone generates two tones of specific frequencies. One tone is generated from a
If you enable the Display DTMF Digits parameter, the digits you are dialing from the keypad or from a softkey, display to the IP phone’s LCD display. This parameter is disabled by default (no digits display when dialing).
You can enable the "Display DTMF Digits" parameter using the Aastra Web UI.
Configuring Display of DTMF Digits
Aastra Web UI
Use the following procedure to configure the display of DTMF digits on the IP phone.
Note: "Display DTMF Digits" is disabled by default.
1.Click on Basic Settings->Preferences->General.
AdditionalFeatures
Model 6757i CT IP Phone User Guide | 243 |