20AT Features

Redial Last Number

20AT Features – Page 5

Redial Last Number

Pressing the REDIAL key dials out the number of the last manually dialled call.

Changing the Caller Volume

During a call, pressing the VOLUME changes the caller volume between normal and loud.

Message Waiting Lamp

The 20AT has a voice message waiting lamp. On systems that support message waiting, the lamp will indicate when a message has been left. The method for answering the message and clearing the lamp will vary according to the system that left the message.

For the INDeX system:

To answer a message waiting lamp:

1.Lift the handset and dial *1. The system rings the extension that left the message.

To cancel a message waiting lamp:

1.Lift the handset and dial *2. Replace the handset.

The Memory Key

The 20AT's MEMORY key can store a single number for quick dialling (ie. lift the handset and press MEMORY). The number can be up to 21 digits.

Setting the memory number

1.Lift the handset off-hook.

2.Press MUTE and then MEMORY.

3.Dial the number to store.

4.Press MUTE again and replace the handset.

Recall

Some telephone systems require a recall signal to initiate special functions (refer to your System Administrator for details). Press RECALL to send this signal.

INDeX 11.0 20AT Telephone User's Guide	20AT Features – Page 5
38DHB0002UKHB Issue 1 (10/05/2004)	Redial Last Number