Appendix J
In case of difficulty
The call privacy feature | • In some installations that have fiber optic service |
does not work. | (digital service to the building, analog service |
| within the building) the signals to the extensions |
| may not support the call privacy feature. |
Error tone (fast busy sig- • The Do Not Disturb feature is activated at the
nal) is heard when making | extension you are calling. |
a page call. |
|
|
|
A double beep sounds | • There is a call on hold at this extension. Press |
every 30 seconds. | and release the LINE button of the call on hold |
| to return to the call and turn off the reminder |
| beep. |
Operation during a power failure.
•This phone will operate during a power failure if a working battery has been installed. You will be able to answer calls with the handset, and dial calls using the dial pad keys and the
The screen displays AC FAIL.
•The phone has been disconnected from AC power. When AC power is restored, the screen will return to the usual display. One touch and redial numbers are retained until power is re stored.
Display screen is blank. | • Make sure the power cord is connected to both |
| the phone and an electrical outlet not controlled |
| by a wall switch. |
My calls fade out or cut in and out when I am using the telephone.
•If you have a headset plugged into the telephone, try unplugging it and firmly plugging it in again.
•Disconnect the telephone base from the modular jack and plug in another corded telephone. If calls are still not clear, the problem is probably in the wiring or local service. Contact your local service company (charges may apply).
•If you are using the speakerphone when this problem occurs, eliminate any background noise. Noise from the television, radio, or other appliances may cause the speakerphone to cut in and out.
Try engaging the [mute] button when you are not speaking or eliminating the background noise.
104