1
Installation Overview
Installation has three phases. In most cases, a separate person is responsible for each phase.
1.Site preparation and wire installation: Usually done by a wire technician or contractor, with the assistance of a customer representative such as a project manager. Please refer to the SpectraLink 6300 MCU: Facility Preparation manual for more information.
2.Installing the SpectraLink system: Done by Polycom or one of our certified distributors.
3.Programming the customer’s telephone system to work with the SpectraLink system: Usually done by the customer’s system administrator or technician. Please refer to the LinkPlus Interface Guide for instructions on programming the telephone system at the local site.
Because these major steps require some parallel activities, it is important to coordinate the activities among the persons involved.The following table lists the installation steps and the person typically responsible for each step.
PN: | 9 |