SpectraLink 6300 MCU: Facility Preparation
Run Listen Verify Diagnostic
The Listen Verify diagnostic is used to determine if Base Stations are performing correctly. See SpectraLink 6300 MCU: Operator’s Console for details. When the test is run, each each Base Station stops transmitting for a short time and listens for other Base Stations. The system checks signal strength levels between Base Stations to ensure that no Base Station is installed too close to another. If Base Stations are too close, one Base Station will be disabled (“locked out”) and an alarm will be activated, unless the Base Station in question has been designated as an “isolated” Base Station.
Base Stations with diagnostic listen values of less than
The Listen Verify test can be run manually or the system can automatically run it at the same time each day. See SpectraLink 6300 MCU: Operator’s Console for detailed information on how to manually or automatically run the Listen Verify diagnostic, and how to interpret results.
56 | PN: |