Xtra
3 Getting started
3.1 Connect the charger
1Insert the plug of the charger power adapter into the socket on the bottom of the charger.
2Plug the power adapter into your power outlet.
3.2 Insert the batteries
1Place the two rechargeable batteries
(included) into the battery compartment.
!Warning
Verify the batteries polarity when inserting the batteries. Incorrect polarity may damage the product.
2Slide the battery door firmly into place.
! Warning
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. USE RECOMMENDED TYPE SUPPLIED WITH THIS PRODUCT. NEVER USE NON- RECHARGEABLE BATTERIES.
3.2.1Place the handset on the charger Place the handset on the charger. The power supply of the charger must be connected to the power outlet.
8
•The battery icon appears on the screen: charging has started.
Note
Leave the handset(s) on the charger for at least 14 hours before first use.
Note
If the batteries are completely exhausted, the product will not be able to
3.2.2 Verify the battery level
The battery icon displays the current battery level:
100% full
60% full
30% full
Empty. Require charging.
Your handset may power down shortly if it is not charged after the battery is empty.
Note
If you are on the phone while the battery is nearly empty, you will hear warning tones. Your call maybe cut off shortly after the warning.
3.3 Register the handset
Registration allows communication between the base unit and handset(s). If the handset cannot communicate with its base, you will not be able to make any call or use many of the functions and features on the phone.
1Press Reg. . Register shall be highlighted.
2Enter the system PIN (Default: 0000). Use Clear to correct typing errors.
3Press Enter to confirm.
• Your handset starts searching for the base.
Getting started