Topcom T101 manual do utilizador Buttons/LED, Installing the line cord

10 9 8 7

Sologic T101 - V1

•Do not operate the equipment if the telephone cable or the equipment itself is damaged.

•If the equipment is dropped, it must be checked by a professional before further use.

•Dangerous voltages are present inside the equipment. Never open the housing or insert objects through the ventilation holes.

•Do not allow liquids to get into the equipment. In case of emergency, pull out the plug from the socket.

•Similarly, if a fault develops during use or before you start to clean the equipment, pull the plug out of the socket.

•Do not touch plug contacts with sharp or metal objects.

•Do not carry out any modifications or repairs to the equipment yourself. Have repairs done to the equipment or the mains cable only by a specialist service centre. Unsatisfactory repairs can lead to considerable danger for the user.

•Children frequently underestimate the dangers associated with electrical equipment. Therefore you must never leave children unsupervised in the vicinity of electrical equipment.

•The equipment is not to be used in a damp room (e.g. bathrooms) or rooms where there is a lot of dust.

•Equipment connected to the telephone line during a thunderstorm can be damaged by lightning. Therefore you should pull the plug out of the main socket during a storm.

5 Buttons/LED

1.Handset

2.Line cord connector

3.Ringer switch (on/off)

4.Handset volume switch

5.Keypad

6.Memory button M1-M2-M3

7.In use LED

8.Redial/Pause button

9.Flash button R

10.Program button

11.Handset curl cord connector

6 Installing the line cord

1	2	3
		4
		5
11
		6
M1	M2	M3

For installation, do the following:

• Put the telephone on a flat surface.

• Plug one end of the line cord into the telephone wall outlet and the other end into the Line connector on the backside of the telephone (2).

4 Sologic T101