Programming
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
L See page 5 for information on the available model.
Registering a handset to the base unit
The supplied handset and base unit are
1Handset: {MENU}
2{V}/{^}: “Initial setting” i
{OK}
3{V}/{^}: “Registration” i
{OK}
4{V}/{^}: “HS registration” i
{OK}
5Base unit:
■
■
Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds.
L If all registered handsets start ringing, press the same button to stop. Then repeat this step.
L The next step must be completed within 90 seconds.
6Handset:
Press {OK}, then wait until a long beep sounds.
Note:
L While registering, “Base in registering mode” is displayed on all registered handsets.
L When you purchase an additional handset, refer to the additional handset’s installation manual for registration.
Deregistering a handset
A handset can cancel its own registration (or the registration of another handset) that is stored to the base unit. This allows the handset to end its wireless connection with the system.
1{MENU}
2{V}/{^}: “Initial setting” i
{OK}
3{V}/{^}: “Registration” i
{OK}
4{V}/{^}: “Deregistration” i
{OK}
5{3}{3}{5} i{OK}
6Select the handset(s) you want to cancel by pressing the desired handset number
{OK}
L The selected handset number(s) flashes.
L To undo a selection, press the
handset number again. The number stops flashing.
7{V}/{^}: “Yes” i{OK}
8{OFF}
For assistance, please visit http://www.panasonic.com/help | 23 |