| Useful Information |
|
|
Making/answering calls, intercom | |
|
|
Problem | Cause/solution |
w is flashing. | L The handset is too far from the base unit. Move |
| closer. |
| L The base unit’s AC adaptor is not properly |
| connected. Reconnect AC adaptor to the base |
| unit. |
| L The handset is not registered to the base unit. |
| Register it (page 23). |
Noise is heard, sound cuts | L You are using the handset or base unit in an area |
in and out. | with high electrical interference. |
| base unit and use the handset away from sources |
| of interference. |
| L Move closer to the base unit. |
| L If you use a DSL/ADSL service, we recommend |
| connecting a DSL/ADSL filter between the base |
| unit and the telephone line jack. Contact your |
| DSL/ADSL provider for details. |
The handset does not ring. | L The ringer volume is turned off. Adjust the ringer |
| volume (page 21). |
The base unit does not | L The ringer volume is turned off. Adjust the ringer |
ring.*1 | volume (page 16). |
I cannot make a call. | L The dialing mode may be set incorrectly. Change |
| the setting (page 14). |
| L The handset is too far from the base unit. Move |
| closer and try again. |
I cannot make long | L Make sure that you have long distance service. |
distance calls. |
|
*1 |
For assistance, please visit http://www.panasonic.com/help | 39 |