| Useful Information |
|
|
Answering system | |
|
|
Problem | Cause/solution |
The unit does not record | L The answering system is turned off. Turn it on |
new messages. | (page 27). |
| L The message memory is full. Erase unnecessary |
| messages (page 28). |
| L If you subscribe to a voice mail service, messages |
| are recorded by your service provider/telephone |
| company, not your telephone. Change the unit’s |
| number of rings setting or contact your service |
| provider/telephone company (page 32). |
I cannot operate the | L Someone is using the unit. Wait for the other user |
answering system. | to finish. |
| L A caller is leaving a message. Wait for the caller to |
| finish. |
| L The handset is too far from the base unit. Move |
| closer. |
I cannot operate the | L The remote access code is not set. Set the remote |
answering system | access code (page 30). |
remotely. | L You are entering the wrong remote access code. If |
| you have forgotten your remote access code, |
| enter the remote access code setting to check |
| your current code (page 30). |
| L Press each key firmly. |
| L The answering system is turned off. Turn it on |
| (page 31). |
|
|
Liquid damage |
|
|
|
Problem | Cause/solution |
Liquid or other form of | L Disconnect the AC adaptor and telephone line |
moisture has entered the | cord from the base unit. Remove the batteries |
handset/base unit. | from the handset and leave to dry for at least 3 |
| days. After the handset/base unit are completely |
| dry, reconnect the AC adaptor and telephone line |
| cord. Insert the batteries and charge fully before |
| use. If the unit does not work properly, contact an |
| authorized service center. |
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
For assistance, please visit http://www.panasonic.com/help | 41 |