Panasonic KX-TG5230AL Installation, Recharge, Battery information, Battery replacement

Page 13

TG5230AL.fm Page 13 Friday, June 11, 2004 5:31 PM

Installation

Recharge

 

Recharge the battery when:

 

IN USE SPIPRIVACY3[1]

— “Recharge battery” is displayed on the handset,

Recharge battery

— “3” flashes, or

— the handset beeps intermittently while it is in use.

 

•The display will continually indicate “Recharge battery” and/or “3” will flash when the handset battery is charged for less than 15 minutes and the handset is lifted off the base unit.

•If the battery has been discharged, the handset will display “Charge for 6 HRS” and “4” when you place the handset on the base unit. The handset will not work unless the battery is charged. Continue charging.

Battery replacement:

If you cleaned the charge contacts and fully charged the battery, but after a few telephone calls, “Recharge battery” is displayed and/or “3” continues to flash, or “Charge for 6 HRS” and “4” are displayed, the battery may need to be replaced. Please replace with a new Panasonic HHR-P104 battery. To replace the battery, see page 12.

Battery information

After your Panasonic battery is fully charged, you can expect the following performance:

Operation

Operating time

While in use (TALK)

Up to 5 hours

 

 

While not in use (Standby)

Up to 11 days

 

 

While using the Clarity Booster feature (p. 24)

Up to 3 hours

 

 

Preparation

•A fully charged battery will give you up to 5 hours of continuous talk time, or keep your handset in Standby mode to receive incoming calls for up to 11 days (if no phone calls are made). Battery power is consumed whenever the handset is off of the base unit, even when the handset is not in use. The longer you leave the handset off of the base unit, the time you can actually talk on the handset will be shortened. Actual battery performance depends on a combination of how often the handset is in TALK mode and how often it is in Standby mode.

•As preventative maintenance, clean the handset and base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the base unit until “Recharge battery” is displayed and/or “3” flashes. This will maximize the battery life.

•If you want to keep the battery fully charged at all times, place the handset on the base unit when the handset is not used. The battery cannot be overcharged.

•When the Clarity Booster feature is turned on automatically or manually, battery operating time may be shortened (p. 24).

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents GHz Expandable Cordless Phone System Charge the battery for 6 hours before initial useFor your future reference Accessories includedKX-TG5230AL KX-TGA520AL Expanding Your PhoneContents Contents For Best Performance Battery chargeBase unit location/Noise Base unit Location of ControlsAuto Button Program Button Handset Location of ControlsOFF Button p Menu Button pHandset soft keys How to use the soft keys/navigator keysHandset navigator key Base unit navigator keyD01 DisplayConnections InstallationBattery Charge Installation Installing the Battery in the HandsetBattery strength To replace the batteryBattery information InstallationBattery replacement RechargeRinger setting Programmable SettingsHow to select a function item from the menu Programming Guidelines HandsetSet area code Programmable Settings Function Menu Table HandsetHandset ringer volume Handset Programmable Settings Ringer VolumeOff ? Temporary ringer offBase unit ringer volume Base Unit Programmable Settings1Tone Ringer ToneSelecting the base unit ringer tone by using the Handset Off Programmable Settings Auto Talk HandsetLow LCD Contrast HandsetTo store your area code Programmable Settings Storing Your Area Code HandsetTo erase your area code Scroll to Set area code by pressing dDialling Mode Handset Programmable Settings Line Mode HandsetTone Making Calls Using the Handset HandsetTo have a hands-free phone conversation System capabilities Operating more than one handset, pLow High 3334444Making Calls Voice Enhancer Technology To turn this feature on, press the soft keyClarity Booster Backlit LCD display/Lighted handset keypadTo adjust the speaker volume Making Calls Using the Base Unit Base UnitPress SP-PHONE Press SP-PHONE, then press REDIAL/PAUSEPress C or s Answering CallsAuto Talk Talk into the MIC To hang up, press SP-PHONE0555222333 Caller ID ServiceHow Caller ID information is displayed Private name displayAnnouncing caller information Talking Caller ID Caller ID Service Talking Caller ID Handset Base UnitTo turn on or off Talking Caller ID feature Caller ID ServiceHandset Talking Caller ID feature Handset Base unit Talking Caller ID feature HandsetViewing the Caller List Handset Using the Caller List0555333444 Using the Caller List0555456789 Calling Back from the Caller List HandsetTo make a call to the edited number, press C or s 05553215551120A 12JAN To erase all entries To erase a specific callerPress the soft key C I D , d, or B to enter the Caller List Press the soft key YESTom Phone Book0555654321 Storing Names and Numbers HandsetSelecting characters to enter names Phone BookIf you make a mistake while entering a name or number For example, to enter TomPress C, s, or the soft key Call Phone Book Dialling from the Phone Book HandsetTo search for a name by initial Press d repeatedly until the desired name is displayedPhone Book Chain Dial Handset AlanWhile you are on a call 5456789 JaneErase? ErasedTo copy one phone book item to another handset Scroll to Copy all items by pressing d Tom Jones0555666777 Receiving then Phone book Received 01/10 Storing Phone Numbers Base Unit Speed DiallerDialling a Stored Phone Number Base Unit To erase a stored numberCalling Base IntercomMaking Intercom Calls Press HOLD/INTERCOMAnswering Intercom Calls IntercomPress C, s or HOLD/INTERCOM Press SP-PHONE or LOCATOR/INTERCOM/TRANSFERIntercom Voice Paging Base Unit When finished, press SP-PHONE or LOCATOR/INTERCOM/ TransferTo make a voice announcement to all handsets, press Handset To complete the transfer, press OFF Transferring a CallDuring a call, press LOCATOR/INTERCOM/TRANSFER Handset Press C, s, or HOLD/INTERCOM to answerTransferring a Call When the system has two or more handsetsFrom a Handset to another Handset To complete the transfer, press OFFQuick call transfer Call Share Conference CallsTo join a conversation Call Share To turn Room Monitor on for the handset Handset Room MonitorTo turn Room Monitor on for the base unit Handset Scroll to Room monitor by pressing d orTo monitor with Handset Room MonitorTo monitor with Base Unit To end monitoring, press OFFTo turn on the Call Privacy feature Special FeaturesMuting Your Conversation Call Privacy HandsetUsing Caller ID Type Special FeaturesKey tone Key Tone HandsetSelecting the recall time Handset 100msScroll to Set recall time by pressing Select the recall time by pressing d or B. Set recall timeHandset incoming call tone Handset Special Features Incoming Call Tone Handset Base UnitBase unit incoming call tone Handset On? 1234Press Dial Lock Enter the password set when the dial lock was turned on Enter the password set when the dial lockSave error Off?To switch to the speakerphone while using the headset Connecting the optional headsetBelt Clip Optional HeadsetConnect the AC adaptor Wall MountingWall Template Wall MountingTo remove the wall mounting adaptor Menu item Command Selection items Direct CommandsDuring programming Direct CommandsTo exit programming, press OFF Cancelling the Handset Registration Handset Cancelling Registration/Re-registrationPress and hold LOCATOR/INTERCOM/TRANSFER for 3 seconds RegistrationPress Locator on base unit for 3 sec Then press OKL Handset 2 RegisteredBusy Cancelling Registration/Re-registrationInvalid Display message Cause & RemedyIf the Following Appear on Your Display DeniedInvalid To the base unit ErrorPlease register Handsets haveProblem Cause & Remedy TroubleshootingTroubleshooting You need to subscribe to Caller ID Recharge battery isTG5230AL.fm Page 71 Friday, June 11, 2004 531 PM Safety Instructions Safety Instructions SpecificationsImportant Information InstallationInstructions to customer Important Information Service difficultiesManufacturer Sales Department Panasonic Australia Pty. Limited62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX14274YA S0504-1064
Top Page Image Contents