Panasonic KX-TG5230AL operating instructions 1234, On?, Press Dial Lock

TG5230AL.fm Page 55 Friday, June 11, 2004 5:31 PM

Special Features

Dial Lock Handset Base Unit

The dial lock feature allows you to prevent others from making calls with the handset(s) and base unit. You can turn on the dial lock for all the units using a handset or the base unit. To use this feature, turn the feature on. The factory preset is OFF.

When the dial lock is turned on, only numbers stored in the phone book as emergency numbers (numbers stored with a # at the beginning of the name) can be dialled (p. 34). We recommend storing emergency numbers in the phone book before using this feature.

To turn the dial lock on (use either the handset or the base unit) Handset

1Press [MENU].

2	Scroll to “Dial lock” by pressing [d] or
						Dial lock
	[B], then press the soft key (				).
				SELECT
3	Enter a 4-digit password.
						Enter password
	lock off.					:____
	• This password is required when turning the dial
	• If more than 4 digits are entered, the last 4 digits
	are the password.
4	Press the soft key (		).
		SAVE
						Enter password
						:1234
5	Press the soft key (		).
		YES
						Turn Dial lock
	• “Dial lock on” is displayed.
						on?

6Press [OFF].

Base Unit

1Press [DIAL LOCK].

• The DIAL LOCK indicator flashes.

Telephone System Advanced Operation

2Enter a 4-digit password.

•If more than 4 digits are entered, the last 4 digits are the password.

3Press [#].

4Enter the password again.

5Press [DIAL LOCK].

•A long beep sounds and the indicator lights.

•If the base unit beeps 3 times, the wrong password was entered in step 4. Start again from step 1.

55