Panasonic KX-TG5230AL Speed Dialler, Storing Phone Numbers Base Unit, To erase a stored number

TG5230AL.fm Page 41 Friday, June 11, 2004 5:31 PM

Speed Dialler

Storing Phone Numbers Base Unit

You can store up to 10 phone numbers in the base unit. The dialling buttons ([0] to [9]) function as memory stations.

Make sure the base unit is not being used.

1Press [PROGRAM].

•The IN USE indicator flashes.

2Enter a phone number of up to 32 digits.

•If you misdial, press [PROGRAM], and start again from step 1.

3Press [AUTO].

4Press a memory station number ([0] to [9]).

•A long beep sounds and the phone number is saved.

•To store other numbers, repeat from step 1.

Memory	[REDIAL/PAUSE]
Station	[PROGRAM]
Numbers	[AUTO]

[SP-PHONE]

•If a pause is required when dialling, press [REDIAL/PAUSE] where needed. A pause counts as one digit (p. 51).

•If a phone number is stored in a memory location which already contains a phone number, the old number will be erased.

•We recommend you make a note of which phone numbers are stored in which memory locations.

•You cannot store or erase phone numbers in the base unit, if the dial lock is turned on (p. 55).

To erase a stored number

1.Press [PROGRAM], then press [AUTO].

2.Press the memory station number ([0] to [9]) for the phone number to be erased.

•A long beep sounds and the phone number is erased.

Dialling a Stored Phone Number Base Unit

1Press [SP-PHONE].

2Press [AUTO].

3Press a memory station number ([0] to [9]).

• The stored number is dialled.

•Speed dial numbers stored in the base unit can only be dialled from the base unit.

•You cannot dial stored phone numbers, if the dial lock is turned on (p. 55).

Advanced Operation

41