Panasonic KX-TG5230AL operating instructions Special Features Incoming Call Tone Handset Base Unit

TG5230AL.fm Page 54 Friday, June 11, 2004 5:31 PM

Special Features

Incoming Call Tone Handset Base Unit

During an intercom call (p. 42) or while using the Room Monitor feature, you can be informed of incoming calls by two tones.

If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to “2”, incoming call tones will be heard only 2 times. If this feature is turned off, no tones will be heard. This factory preset is “2”.

Using the handset, this feature can be set separately for the handset and base unit.

Handset incoming call tone Handset

1Press [MENU].

2	Press the soft key (		) at “Ringer
		SELECT				Ringer setting
	setting”.
3	Scroll to “Incoming call.” by pressing
						Incoming call.
	[d] or [B], then press the soft key (				).
				SELECT
4	Select “On”, “Off” or “2” by pressing [d] or
						Incoming call
	[B].					tone :2

5Press the soft key ( SAVE ), then press [OFF].

Base unit incoming call tone Handset

1Press [MENU].

2	Scroll to “Initial setting” by pressing
						Initial setting
	[d] or [B], then press the soft key (				).
			SELECT
3	Scroll to “Set base unit” by pressing [d]
						Set base unit
	or [B], then press the soft key (			).
		SELECT
4	Scroll to “Incoming call.” by pressing
						Incoming call.
	[d] or [B], then press the soft key (				).
			SELECT
5	Select “On”, “Off” or “2” by pressing [d] or
						Incoming call
	[B].					tone :2

6Press the soft key ( SAVE ), then press [OFF].

54