Programming
4{V}/{^}: “Call block” i
{SELECT}
5{V}/{^}: “Yes” i{SELECT} i{OFF}
■By entering phone numbers:
1{MENU} i{#}{2}{1}{7} i
{ADD}
2Enter the phone number (32 digits max.).
L To erase a digit, press
{CLEAR}.
3{SAVE} i{OFF}
Block calls without phone number You can reject a call without phone number including “Out of area”, “Private caller”, or “Long distance”.
1 MENU | 2 4 0 |
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
L See page 5 for information on the available model.
Registering a handset to a base unit
The supplied handset and base unit are
{ | } i{#}{ }{ }{ } |
2 {V}/{^}: Select the desired setting. | |
1 Handset:
re-register
i{SAVE} i{OFF} |
Viewing/editing/erasing call block numbers
1{MENU} i{#}{2}{1}{7}
2{V}/{^}: Select the desired entry. L To exit, press {OFF}.
3Proceed with the desired operation.
■Editing a number:
{EDIT} iEdit the phone number. i{SAVE} i{OFF}
■Erasing a number:
{ERASE} i{V}/{^}: “Yes” i{SELECT} i{OFF}
Note:
L When editing, press the desired dial key to add, {CLEAR} to erase.
LWhen viewing, {w/o NUM} appears if the block calls without phone number feature is turned on. To turn the feature off: {w/o NUM} i{V} i
{SAVE} i{OFF}
{MENU} i{#}{1}{3}{0}
2 Base unit:
■
■
L If all registered handsets start ringing, press the same button to stop. Then repeat this step.
L The next step must be completed within 90 seconds.
3Handset:
Press {OK}, then wait until a long beep sounds.
4{OFF}
26For assistance, please visit http://www.panasonic.com/help