Panasonic KX-TG6413, KX-TG6473, KX-TG6411, KX-TG6412 Error messages, Display message Cause/solution

Page 42

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message	Cause/solution
Busy	L The called unit is in use.
or	L Other units are in use and the system is busy.
or	Try again later.
System busy. Try again	L The handset you are using is too far from the
System busy. Try again	base unit. Move closer and try again.
later.	L The handset’s registration may have been
	canceled. Re-register the handset (page 26).
Check tel line	L The supplied telephone line cord has not been
	connected yet or not connected properly.
	Check the connections (page 9).
Use rechargeable	L A wrong type of battery such as Alkaline or
battery.	Manganese was inserted. Use only the
	rechargeable Ni-MH batteries noted on page
	5, 7.
Error!!	L The handset’s registration has failed. Move
	the handset and base unit away from all
	electrical appliances and try again.
Invalid	L There is no handset registered to the base
	unit matching the handset number you
	entered.
	L The handset is not registered to the base unit.
	Register the handset (page 26).
No link. Reconnect base	L The handset has lost communication with the
AC adaptor.	base unit. Move closer to the base unit and try
	again.
	L Unplug the base unit’s AC adaptor to reset the
	unit. Reconnect the adaptor and try again.
	L The handset’s registration may have been
	canceled. Re-register the handset (page 26).
Requires subscription	L You must subscribe to a Caller ID service.
to Caller ID.	Once you receive caller information after
	subscribing to a Caller ID service, this
	message will not be displayed.
Store V.M. no.	L You have not stored the voice mail access
	number. Store the number (page 37).

42For assistance, please visit http://www.panasonic.com/help

Image 42

Contents Operating Instructions KX-TG6473Introduction Caller ID ServiceVoice Mail Service Important InformationModel composition KX-TG6411 seriesSeries Model No Base unit Handset Accessory information Supplied accessoriesOptional handset feature overview Feature Additional/replacement accessoriesAccessory item Order number Expanding your phone systemFor your safety Important safety instructions Specifications Battery charge Setting upBattery installation ConnectionsDuring a power failure Battery level IconOperation Operating time Base unit ControlsHandset KX-TGA641 Microphone Charge contacts Control type a Soft keysKX-TG6421 series Answer on indicatorDisplay Charge contacts SpeakerDisplay language Initial settingsDialing mode Voice guidance languageMaking calls Answering callsMute Useful features during a callHold FlashTemporary tone dialing for rotary/pulse service users Handset clarity boosterCall share Shared phonebook Adding entriesFinding and calling a phonebook entry Editing entries Erasing entriesChain dial Menu Programmable settingsProgramming by scrolling through the display menus Main menu Sub-menuHandset Programming using the direct commands Feature Setting code System CodeFeature Setting code System Code Setting*1 VM tone detectPre-recorded Alarm Silent modeSpecial programming Changing the start and end time Turning silent mode on/offCall block Caller ID subscribers only Storing unwanted callersRegistering a unit Operating additional unitsRegistering a handset to a base unit Deregistering a handset Talking Caller ID Using Caller ID serviceCaller ID features Missed callsRinger ID Caller ID number auto edit featureCaller list Viewing the caller list and calling backStoring caller information to the phonebook Erasing selected caller informationErasing all caller information Select iOFFMemory capacity Answering systemTurning the answering system on/off Call screeningListening to messages using the base unit Greeting messageRemote operation Listening to messages using the handsetRemote access code Erasing all messagesWhen the English voice guidance is selected Using the answering system remotelyRemote commands When the Spanish voice guidance is selectedTurning on the answering system remotely Answering system settingsFor voice mail service subscribers Number of rings before the unit answers a callCaller’s recording time Message alertTo erase the voice mail access number Voice mail serviceStoring the voice mail VM access number Voice mail VM tone detectionTurning VM tone detection on/off The default setting is On Listening to voice mail messagesTransferring calls, conference calls IntercomHandset locator Making an intercom callBelt clip Wall mountingTo attach Charger To remove the wall mounting adaptorError messages Display message Cause/solutionTroubleshooting General use Problem Cause/solutionProgrammable settings Problem Cause/solution Problem Cause/solution Battery recharge Problem Cause/solutionMaking/answering calls, intercom Noise is heard, sound cuts Service provider/telephone company again to Answering system KX-TG6421 series Liquid damage Problem Cause/solution FCC and other information FCC RF Exposure Warning Guía Rápida Española Correcto IncorrectoTeclas de función Idioma de la pantallaIdioma de la guía de voz Operaciones básicas Para grabar su propio mensaje Mensaje marcador Contestador de llamadas Operación remota Serie KX-TG6421Preguntas frecuentes Solución rápida de problemas 1El auricular muestra2El auricular no emite ningún tono de marcación Hablar apareceCómo registrar un auricular a una unidad base Warranty For United States and Puerto Rico Ship-In ServiceParts Labor One 1 Year Limited Warranty Limits And Exclusions Customer services Or, contact us via the web atTTY users hearing or speech impaired users can call Index Page For your future reference Read these Operating InstructionsCall us at 1-800-211-PANA Attach your purchase receipt here