Programming
sleeping. Silent mode can be set for each handset.
Important:
L Set the date and time beforehand (page 13).
L We recommend turning the base unit ringer off (page 15) and call screening off (page 31) in addition to turning the silent mode on.
L If you have set the alarm, the alarm sounds even if the silent mode is turned on.
Turning silent mode on/off
1{MENU} i{#}{2}{3}{8}
2{V}/{^}: Select “On” or “Off”. i
{SAVE}
L If you select “Off”, press {OFF} to exit.
3Enter the desired hour and minute you wish to start this feature.
4{AM/PM}: Select “AM” or “PM”. i
{OK}
5Enter the desired hour and minute you wish to end this feature.
6{AM/PM}: Select “AM” or “PM”.
7{SAVE} i{OFF}
L When the silent mode is set, &is displayed.
Note:
L To correct a digit, press {^} or {V} to move the cursor to the digit, then make the correction.
Changing the start and end time
1{MENU} i{#}{2}{3}{7}
2Continue from step 3, “Turning silent mode on/off”, page 25.
Call block (Caller ID subscribers only)
This feature allows the unit to reject calls when:
–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 25).
–the unit receives a call without phone number (“Block calls without phone number”, page 26).
When a call is received, the unit rings for a short time while the caller is being identified. If the unit recognizes the call as unwanted, “Caller blocked” is displayed and the unit sends out a busy tone to the caller, and then disconnects the call.
Important:
L When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list (page 29) with $after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call block list by using the caller list or by entering the numbers directly.
Important:
L You must store the phone number with an area code (10 digits) in the call block list.
■From the caller list:
1{MENU} i{#}{2}{1}{3}
2{V}/{^}: Select the entry to be blocked.
L To edit the number, press {EDIT} repeatedly until the phone number is shown in the
3{SAVE}
For assistance, please visit http://www.panasonic.com/help | 25 |