1Attaching the Snap-on Speaker
Remove the protective cover from the snap-on speaker (see fig 2) and attach the snap-on speaker on the top of the N-Gage QD game deck. The snap-on speaker attaches to the headset and the charger connector (see fig 4)
IMPORTANT: Calls cannot be made or received while the snap-on speaker is attached. To make a call, remove the snap-on speaker before dialling the number. To receive a call, remove the snap-on speaker before answering the call.
2Using the Snap-on Speaker
To use the Snap-on Speaker turn it on using the ON/OFF switch on the left side of the speaker. Adjust the volume using the Volume wheel.
3Installing and replacing the Battery
Remove the battery cover on the back of the snap-on speaker by pressing the release button and pushing the cover up. Install or replace the AAA battery and put the cover back on. (See fig. 3).
4Charging the N-Gage with the snap-on speaker attached
N-Gage QD game deck can be charged while the snap-on speaker is attached. Plug in the original ACP-12 charger to the socket on the right hand side of the snap-on speaker while the speaker is attached to the N-Gage QD. (See fig. 5).
Note: The snap-on speaker cannot be charged. Charging the N-Gage QD while the snap-on speaker is attached does not affect the snap-on speaker battery life.
