Haier ESA424K-L manual Power, Speed, Press ON/OFF to turn on the air conditioner

NOTE: Remote control may differ in appearance.

ON/OFF

MODE

SPEED

TIMER

TEMP/TIME

TEMP/TIME

UsingtheRemoteControl

Temperature

ʄPress the TEMP/TIME up arrow button to raise the temperature. Each time you press or hold the TEMP/TIME up arrow button, the temperature will go up 1ºF until it reaches 86°F (30°C).

TEMP/TIME

ʄPress the TEMP/TIME down arrow button to lower the temperature. Each time you press or hold the TEMP/TIME down arrow button, the temperature will go down 1ºF until it reaches 61°F (16°C).

NOTE: One CR2025 battery (included) powers the remote control. Replace battery after 6 months of use, or when the remote control starts to lose power.

Power

Press ON/OFF to turn on the air conditioner.

ON/OFF

Mode

Press MODE to choose Fan, Cool, Energy Saver or Dehum.

MODE

Speed

Press SPEED to choose High, Med or Low.

SPEED

TEMP/TIME

Timer

To set the Timer for a 1-hour to 24-hour delay before the air conditioner is turned off (the air conditioner must be On):

1.Press TIMER. Timer OFF indicator light on the air conditioner

FRQWUROSDQHOZLOOÀDVK

TIMER

2.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.

3.After 5 seconds, Timer OFF indicator light on the air conditioner control panel will remain on.

To set Timer to turn on the air conditioner, keeping previous settings:

1.Turn off the air conditioner.

2.Press TIMER. Timer On indicator light on the air conditioner

FRQWUROSDQHOZLOOÀDVK

3.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.

4.After 5 seconds, Timer On indicator light on the air conditioner control panel will remain on.

To set Timer to turn on the air conditioner, changing the previous settings:

1.Turn on the air conditioner.

2.Adjust the mode to Fan, Cool, Energy Saver or Dehum.

3.For Fan, Cool or Energy Saver mode, adjust the fan speed to High, Med or Low.