![](/images/new-backgrounds/1007354/735413x1.webp)
Install outer case in window
1.Place outer case in window. Lower sash until it rests behind
IURQWÀDQJHRIWRSFKDQQHO%RWWRPFKDQQHOPXVWUHVW behind window sill.
A. Top channel
B. Window sash
C. Bottom channel
2.Expand both curtains to contact the window frame. Install four wood screws 31/32”. Two in each upper right and left of the curtains.
3.Install three wood screws 31/32” in the top mounting channel
8VHWZRZRRGVFUHZV´WR¿[WKHFDVHWRZLQGRZVVDVK
,QVWDOOOHIW ULJKWLQVWDOODWLRQEUDFNHWDQGDVVKRZQLQ¿J ,QVWDOOEROW´ORQJÀDWKHDGEROWDQGORFNQXWWRWKH installation bracket and adjust them to proper length ,then use ´VFUHZVWR¿[WKHEUDFNHWRQWKHFDVH
6.Use a wood block between the leveling bolts and the wall if the wall is weak or if the weight of the air conditioner falls between the studs in the wall.
CompleteInstallation
1. Insert the foam seal behind the top of the lower window sash and against the glass of the upper window.
A
B
NOTE: To make screws easier to drive, drill a pilot hole into the
sash through clearance hole in curtains. | A. Top of lower window sash | |
B. Foam seal | ||
|
7