Lincoln Electric Pro-MIG 140 manual Safety Precautions, Identify and Locate Components

A-2 INSTALLATION A-2

Read entire installation section before starting installation.

SAFETY PRECAUTIONS

WARNING

ELECTRIC SHOCK can kill.

FIGURE A.1

1

• Only qualified personnel should perform this installation.

• Only personnel that have read and under-	2
stood the Pro-MIG 140 Operating Manual
should install and operate this equipment.
• Machine must be plugged into a receptacle
which is grounded per any national, local
or other applicable electrical codes.
• The Pro-MIG 140 power switch is to be in	4
the OFF (“O”) position when installing
work cable and gun and when connecting	3
power cord to input power.

IDENTIFY AND LOCATE	6
COMPONENTS
If you have not already done so, unpack the Pro-MIG	5

140 from its carton and remove all packing material around the Pro-MIG 140. Remove the following loose items from the carton (see Figure A.1):

1. Pro-MIG 140

2. Gun and cable assembly(1)

7

8

3.Literature and miscellaneous including:

a)This operating manual

b)3 extra .023"-.025” (0.6 mm) contact tips

c) 2 extra .035” (0.9 mm) contact tips	10
d) Hex key wrench for removal of drive roll.	9

4.10 ft (3.0 m) work cable.

5.Work clamp.

6.a) 2lb. spool of .025” (0.6 mm) Super Arc L-56 MIG wire.

b)Sample spool of Innershield .035” (0.9 mm) NR-211-MP.

7.Welding Helmet.

8.Adjustable mixed-Gas Regulator & Hose.

9.Instructional video.

10.Nozzle.

For available options and accessories refer to the

Accessories Section of this manual.

1)As shipped from the factory, the Pro-MIG 140 gun liner is ready to feed .023” (0.6 mm) -.035 (0.9 mm) wire.

Pro-MIG 140