OPERATION | ||
|
|
|
WIRE REEL LOADING - READI-REELS, SPOOLS OR COILS
To Mount a 30 Lb. (14 kg)
The Spindle should be located in the LOWER mounting hole.
1)Depress the Release Bar on the Retaining Collar and remove it from the spindle.
2)Place the Adapter on the spindle.
3)
4)Rotate the spindle and adapter so the retaining spring is at the 12 o'clock position.
5)Position the
6)Set one of the
7)Lower the
8)Slide cage all the way onto the adapter until the retaining spring "pops up" fully.
WARNING
Check to be sure the Retaining Spring has fully returned to the locking position and has SECURELY locked the
___________________________________________
9)To remove
FIGURE B.1
To Mount 10 to 44 Lb.
The Spindle should be located in the LOWER mounting hole.
For 8" (200 mm) spools, a K468 spindle adapter must first be slipped onto spindle.
For
1)Depress the Release Bar on the Retaining Collar and remove it from the spindle.
2)Place the spool on the spindle making certain the spindle brake pin enters one of the holes in the back side of the spool. Be certain the wire comes off the reel in a direction so as to
3)