Lincoln Electric IM586-B manual Damaged encoder p.c. board

Page 36

E-5	TROUBLESHOOTING	E-5

	Observe all Safety Guidelines detailed throughout this manual

PROBLEMS

(SYMPTOMS)

POSSIBLE

CAUSE

RECOMMENDED

COURSE OF ACTION

Pressing the trigger key has no	1. The connector from the control
effect while not welding.		p.c. board to the display p.c.
		board or the connector from the
		display p.c. board to the keypad
		are loose or improperly inserted.
	2. Damaged keypad
	3.	Damaged display p.c. board.
	4.	Damaged control p.c. board.

Pressing the control key has no	1. Make sure that the DIP switches
effect while not welding.		on the control p.c. board are not
		set for security mode.
	2.	The connector from the control
		p.c. board to the display p.c.
		board or the connector from the
		display p.c. board to the keypad
		are loose or improperly inserted.
	3. Damaged keypad
	4.	Damaged display p.c. board.
	5.	Damaged control p.c. board.

One of the knobs changes the dis-	1. The display is in a mode that can
play, but the other doesnʼt.		only use one encoder.
	2.	The connector from the control	If all recommended possible areas
		p.c. board to the encoder p.c.	of misadjustment have been
		boards may be loose or improp-	checked and the problem persists,
		erly inserted.	Contact your local Lincoln
	3.	Damaged encoder p.c. board.	Authorized Field Service Facility.
	4.	Damaged control p.c. board.

Neither knob changes the display.	1. The connector from the control
		p.c. board to the encoder p.c.
		boards may be loose or improp-
		erly inserted.
	2.	Damaged control p.c. board.
	3.	Damaged encoder p.c. boards.

Displays & LEDʼs on keypad are	1. Power source is off.
off. The green and red LEDʼs on the	2. Power source supply is not sup-
control p.c. board are off.		plying 42 VAC to the wire feeder
		control box.
	3.	Damaged input power wiring in
		the LN-10 control box.
	4.	Damaged control p.c. board.

CAUTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your

STT-10

Image 36

Contents IM586-B Safety California Proposition 65 WarningsElectric Shock can kill Welding and Cutting Sparks can Cause fire or explosion IiiPrécautions DE Sûreté Sûreté Pour Soudage a LʼArcPlease Examine Carton and Equipment For Damage Immediately On-Line Product RegistrationTable of Contents Diagrams Section F ViiP312 Series Installation General DescriptionSTT-10 Safety Precautions Mounting the 10 Series Wire Drive UnitRecommended Processes and Equipment Mounting Synergic 7F Wire Drive Unit Connecting Wire Drive Unit to Control BoxMounting the STT-10 Control Box K1565-2 Boom Model Wire Drive Speed Range Selection Control Speed Range SettingSeries Wire Drive Ratio Selection Electrode RoutingWire Feed Drive Roll Kits Procedure to Install Drive Roll and Wire GuidesSynergic 7F 4-Roll Kits KP655 and KP656 Electric Shock can killGUN Connections General GUN and Cable Assemblies with Standard ConnectionGUN and Cable Assemblies with FAST-MATE Connection Gmaw GunsSynergic 7F Wire Drives K679 Water Connections for Water Cooled GunsGun Cable Connection with Fast-Mate Connection Gmaw Shielding GasElectrical Installation Input Cable STT-10 Control to Power SourceOptional Features Installation Dual Procedure Switch OptionsBoom and Bench Conversions Materials Required for bench to boom conversionSTT-10 Control DIP Switch Setup OperationOperating Instructions Step Trigger Mode Operation Selection Security Mode SelectionRobotics Mode Selection Range Lockout Mode SelectionPower-Down Save Keypad and Display OperationOperation Keys Keypad and Display DescriptionTrigger Mode Selection Trigger Mode Select KeyDisplay Control Keys Security Mode Acceleration SelectionWire Reel Loading READI-REELS, Spools or Coils Figure B.1Feeding Electrode and Brake Adjustment Drive Roll Pressure SettingProcedure for Setting Angle of Feedplate GAS Guard Regulator SettingMaking a Weld Wire Reel Changing Wire Feed Overload ProtectionExplanation of Prompting and Error Messages Display Prompt or ErrorAccessories Roll DH DriveSolid & Cored Steel Electrode Driven K683-1 Dual Procedure Switch K683-3 Dual Procedure SwitchK1558-1 Remote Switch Interface Module K1758-L Input Cable Assem BLYGUN Adapters for 10 Series Wire Drive Heads Coil AdapterMagnum 200/300/400 Guns K206, K289, and K309K1634-1 Wire Reel Enclosure KIT GUN and Cable AssembliesMaintenance MaintenanceTroubleshooting HOW to USE Troubleshooting GuideContact your local Lincoln Authorized Field Service Facility Authorized Field Service Facility Contact your local LincolnTroubleshooting Damaged encoder p.c. board Troubleshooting Procedure for Replacing PC Boards Electric Shock can killDiagrams Diagrams Diagrams Connection Diagrams Dimension Print Bench Model Dimension Print Boom Model Control Box STT-10 STT-10 Precaucion Warnung