Friedrich MW18C3F, MR18C3F En-15, Temperature and Humidity Range, Tips for saving energy

Page 16

OPERATING TIPS

Temperature and Humidity Range

 

Cooling Mode

Dry Mode

 

 

 

Outdoor temperature

About 14 °F to 115 °F

About 14 °F to 115 °F

 

 

 

Indoor temperature

About 64 °F to 90 °F

About 64 °F to 90 °F

 

 

 

If the air conditioner is used under higher temperature conditioner than those listed, the built-in protection circuit may operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.

Do not use this unit for any purposes other than the Cooling, Dehumidifying, and air-circulation of rooms in ordinary dwellings.

If the unit is used for long periods under high-humidity conditions, condensation may form on the surface of the indoor unit, and drip onto the floor or other objects underneath. (About 80% or more)

Tips for saving energy

When the outdoor temperature is low (about 50 °F or less), the unit will consume the power of 20~40W unless the power plug is disconnected from the outlet even if the air conditioner turns off.

Remove the power plug to stop the power supply for energy saving when not using for a long time.

En-15

06B030_9315255044-01_En

15

2006.2.6, 1:47 PM

Image 16
Contents Operating Manual Español Français EnglishContents Safety PrecautionsSpecifications Fiche TechniqueFeatures and Functions En-2Name of Parts En-3Preparation En-4Operation En-5About Mode Operation En-6To Stop Operation Press the START/STOP button Q About Auto Changeover OperationTimer Operation En-7Sleep Timer Operation About the Sleep TimerEn-8 During Cooling/Dry operationAdjusting the Direction of AIR Circulation Vertical Air Direction Adjustment Press the SET button RRight-Left Adjustment Adjust the Right-Left louvers Types of Air flow Direction SettingSwing Operation Manual Auto OperationEn-10 To select Swing Operation Press the Swing button SCleaning and Care En-11Install the Air cleaning filter set set Install the two Air filters and close the Intake GrilleReplacing dirty Air cleaning filters Replace them by two new Air cleaning filtersTroubleshooting Symptom ProblemEn-13 NormalEvent of Power Interruption Symptom Items to checkOperating Tips En-14Temperature and Humidity Range Cooling Mode Dry Mode Outdoor temperatureIndoor temperature About 64 F to 90 F En-1506B0309315255044-01En 2006.2.6, 147 PM Précautions DE Sécurité SommaireFr-1 Caractéristiques ET Fonctions Fr-2Nomenclature DES Organes Fr-3Préparatifs Fr-4Fonctionnement Fr-5Réglage du thermostat Appuyez sur la touche SET TEMP. L Fonctionnement Super SilencieuxFr-6 Propos du mode de fonctionnementArrêt du climatiseur Appuyez sur la touche START/STOP Q Fr-7 Fonctionnement PAR Minuterie DE ProgrammationPropos de la programmation combinée Marche/Arrêt Fonctionnement Temporisé Fr-8Changement des réglages du minuterie Propos de la minuterie à temporisateurRéglage DE LA Direction DU Flux D’AIR Fr-9Réglage Gauche-Droite Ajustez les Volets Gauche-Droite Positions de réglage de direction du flux d’airFonctionnement Oscillant Fonctionnement MANUEL-AUTOMATIQUEFr-10 Propos du fonctionnement oscillantNettoyage ET Entretien Fr-11Nettoyez à l’eau Remettez la grille d’admissionRemplacement de filtres de nettoyage d’air sales Fr-12Remplacez-les par deux nouveaux filtres de nettoyage d’air Remarques sur les filtres de nettoyage d’airGuide DE Dépannage Fr-13Symptôme Problème Voyez FonctionsConseils D’UTILISATION Fr-14Remise en marche automatique En cas de coupure de courantFr-15 Plage de température et d’humiditéConseils pour une économie d’énergie Température intérieure Environ 64 F à 90 F06B0309315255044-01Fr 2006.2.6, 222 PM Precauciones DE Seguridad ÍndiceSp-1 Características Y Funciones Sp-2Denominación DE LOS Componentes Sp-3Preparativos Sp-4Funcionamiento Sp-5Para seleccionar el modo de funcionamiento Para ajustar el termostatoNotassobreelfuncionamientodecambioautomáticoAUTOCHANGEOVER Sp-6Notas sobre el funcionamiento de los modos Funcionamiento CON Temporizador Sp-7Empleo del temporizador programable Si el aparato ya está funcionando pase al pasoSp-8 Para cambiar los ajustes del tiempoNotas sobre el temporizador de desconexión automática Sleep Durante el funcionamiento de refrigeración/deshumectaciónSp-9 Ajuste DE LA Dirección DE Circulación DEL AireTipos de ajustes de la dirección del flujo de aire Funcionamiento DE Vaivén Funcionamiento Manual Y AutomáticoSp-10 Observaciones sobre el funcionamiento de vaivénLimpieza Y Mantenimiento Sp-11Sustitución de los filtros de limpieza de aire sucios Sustitúyalos dos filtros de limpieza de aire nuevosAcerca de los filtros de limpieza de aire Mantenimiento de los filtros desodorizantesSíntoma Problema Vea la Página Localización DE AveríasSp-13 FuncionesConsejos Para EL Funcionamiento Sp-14Reinicio automático En el caso de una interrupción de la alimentaciónSp-15 Margen de temperatura y humedadConsejos para el ahorro de energía Temperatura interior Aprox F a 90 F06B0309315255044-01Sp 2006.2.6, 222 PM 06B0309315255044-01Sp 2006.2.6, 222 PM

MR18C3F, MW18C3F specifications

The Friedrich MW18C3F and MR18C3F are two innovative air conditioning units designed to provide optimal comfort and efficiency in home and office environments. Both models are part of Friedrich's commitment to delivering high-quality climate control solutions that cater to various needs and preferences.

One of the standout features of the MW18C3F and MR18C3F is their advanced inverter technology. This technology enables the units to adjust their cooling capacity according to the ambient temperature, ensuring that energy consumption is minimized while still maintaining a comfortable environment. By operating at variable speeds, the inverter systems reduce energy waste, making these units eco-friendly options.

The MW18C3F is equipped with a cooling capacity of 18,000 BTU, making it suitable for medium to large spaces, while the MR18C3F model offers similar cooling performance with added versatility for different installation options. Both models boast a high EER (Energy Efficiency Ratio) rating, which indicates excellent energy efficiency, leading to lower utility bills while still being effective in combating heat.

Another significant characteristic of these models is their smart technology integration. The Friedrich MW18C3F and MR18C3F offer Wi-Fi connectivity, allowing users to control the system remotely via a smartphone app. This feature provides unparalleled convenience, enabling users to set schedules, adjust temperatures, and monitor energy consumption from virtually anywhere. The app also supports voice commands, compatible with major smart home platforms, enhancing user experience.

In terms of design, both units feature a sleek and modern aesthetic that blends well with most interior décors. They come with a user-friendly interface, simplifying operation and customization of settings. The units are also designed with noise reduction technologies, ensuring that they operate quietly, making them suitable for bedrooms and workspaces where tranquility is crucial.

The filtration system in the MW18C3F and MR18C3F is another important aspect, featuring washable filters that help maintain indoor air quality by trapping dust and allergens. This not only improves the comfort of users but also prolongs the lifespan of the units by preventing buildup of dirt and debris.

Overall, the Friedrich MW18C3F and MR18C3F showcase a combination of advanced technology, energy efficiency, and user-friendly features. With their modern design and smart capabilities, these air conditioners stand out as excellent choices for anyone looking to enhance their indoor climate control while being mindful of energy consumption.