Lincoln Electric IM10023 manual Interfacing to the MAXsa 10 CON, Troller

A-4 INSTALLATION A-4

INTERFACING TO THE MAXsa™ 10 CON-

TROLLER

The MAXsa™ 10 CONTROLLER is a versatile con- troller. The User Interface can be removed and used as a hand-held pendant. Most circuits can be accessed through the screwless terminal strip. The auxiliary relays can control standard Lincoln equipment, or they can be used to control any other auxiliary equipment custom controls. PLC interfacing to control starting, stopping, motion, etc, can be accomplished with ease.

Using the Controller as a Hand-held Pendant:

1.Remove the 4 screws from the MAXsa™ 10 CON- TROLLER that hold the cover. See Figure A.2.

2.Remove the 2 screws that hold the pendant in the brackets. Use the acccess holes shown.

3.Extend the control cable as needed with an Arc Link cable of appropriate length. See Figure A.2

FIGURE A.2 - HAND HELD PENDANT

1	2	Front Vie w
	Cov	r eorme dev

Cov rseweScr	Pendant
(4 places)	Screws
	( 2 Places)

Access

Hol e

eCov

3

K1543-xx

or K2683-xx Arclink Cba le (Optional)

MAXsa™ 10 CONTROLLER