Milwaukee Hammer-Drill manual Specific Safety Rules, Symbology, Specifications

SPECIFIC SAFETY RULES

1.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

2.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

3.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

4.Keep hands away from all cutting edges and moving parts.

5.Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.

Symbology

Properly Recycle Nickel Cadmium Batteries

Direct Current

Underwriters Laboratories, Inc.

No Load Revolutions per Minute (RPM)

Specifications

Cat. No.	Volts DC	No Load RPM	No Load Blows
			per Minute
0613-20	14.4	Low 0-500	Low 0-7500
		High 0-1700	High 0-25500
0614-20	14.4	Low 0-500	Low 0-7500
		High 0-1700	High 0-25500
0616-20	14.4	Low 0-500	N/A
		High 0-1700
0622-20	18	Low 0-500	N/A
		High 0-1700
0624-20	18	Low 0-500	Low 0-7500
		High 0-1700	High 0-25500
		4