Skil SHD77 manual Accessories, ONLy 20 AMP, 125 Volt TWIST-TO-LOCK

SM 1619X03173 11-08:SM 1619X03173 11-08 12/2/08 11:21 AM Page 13

TWIST-TO-LOCK CONNECTOR INSTRUCTIONS FOR MODELS SHD77 & SHD77M CODE 72

ONLy 20 AMP, 125 VOLT “TWIST-TO-LOCK”

The Model SHD77 & SHD77M code 72 is equipped with a “Twist-To-Lock” male connector as shown. Use only a 3-wire extension cord which has a mating “Twist-To-Lock” female connector on one end and a 3-prong grounding plug on the other end. (See Electrical Safety section on page 2 for grounding infor mation.)

Accessories

!WARNING If an extension cord is necessary, a cord with

adequate size conductors that is capable of carrying the current necessary for your tool must be used. This will prevent excessive voltage drop, loss of power or overheating. Grounded tools must use 3-wire extension cords that have 3-prong plugs and receptacles.

NOTE: The smaller the gauge number, the heav ier the cord.

Tool’s	Cord Size in A.W.G.				Wire Sizes in mm2
Ampere	Cord Length in Feet				Cord Length in Meters
Rating
	25	50	100	150	15	30	60	120
3-6
	18	16	16	14	0.75	0.75	1.5	2.5
6-8	18	16	14	12	0.75	1.0	2.5	4.0
8-10	18	16	14	12	0.75	1.0	2.5	4.0
10-12	16	16	14	12	1.0	2.5	4.0	—
12-16	14	12	—	—	—	—	—	—

*	Blade	(*= standard equipment)
*	Wrench	(**= optional accessories)

**Carrying case

**Rip Fence

**Non-marring overshoe

-13-