Sparky Group BUR 15E II Technical specifications, III Safety instructions, Work Area

Page 3

II - Technical specifications

 

BUR 15E

BUR 18E

▪ Nominal battery charge:

14.4V

18V

▪ Charger:

230–240V ~ 50Hz

230–240V ~ 50Hz

▪ Batteries:

2 x 1.5 Ah

2 x 1.5 Ah

▪ Charging time:

1.5 Hours

1.5 Hours

▪ Drill no load speed:

0–350, 0–1250 min-1

0–350, 0–1250 min-1

▪ Torque settings:

20 Positions

20 Positions

▪ Drill chuck capacity:

13 mm Keyless

13 mm Keyless

▪ Max drilling capacity in

 

 

steel / wood / concrete:

10 / 28 / 10 mm

13 / 28 / 13 mm

▪ Hammer impact frequency:

0–5600, 0–20.000 min-1

0–5600, 0–20.000 min-1

▪ Weight:

2.1 kg

2.1 kg

III - Safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Save these instructions!

WORK AREA

Keep work area clean and well lit. Cluttered and dark areas invite accidents.

Do not operate power tools in explosive atmos- pheres, such as in the presence of flamma- ble liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while oper- ating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of elec- tric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet condi- tions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords in- crease the risk of electric shock.

When operating a power tool outdoors, use an outdoor extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medi- cation. A moment of inattention while operating power tools may result in serious personal in- jury.

Use safety equipment. Always wear eye protec- tion. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and bal- ance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewel- lery or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce dust related hazards.

Instruction Manual

3 EN

pages-BUR15-18-[13mm].indd3

22.3.2006 ã. 09:05:33

Image 3
Contents Introduction ContentsDescription of Symbols II Technical specifications III Safety instructionsElectrical Safety Personal SafetyWear ear protectors with impact drills. Expo IV Additional safety rules for drillsPower Tool USE and Care ServiceSulting from such changes VI Additional instructions for work with the battery packViii Operation VII Know your productDrilling Positions Forward / Reverse SwitchTorque Adjustment / Hammer Selection Collar Adjustable Side HandleGeneral Inspection IX MaintenanceChuck Replacement CleaningSpecifications may differ from country to country WarrantyRespect DE L’ENVIRONNEMENT SommaireDeballage MontageLégende Securite Personnelle II Caractéristiques techniquesAire DE Travail Securite ElectriqueGer l’ouïe 13 FRUtilisation ET Entretien DE L’OUTIL Electrique DepannageRègles complémen- taires pour travail avec le chargeur Viii Utilisation VII NomenclatureSerrage ET Desserrage DES Forets Remplacement DU MandrinRéglage DU Couple DE Vissage Vitesses MécaniquesNettoyage Viii EntretienIX Garantie 17 FRВведение СодержаниеДвойная изоляция для дополнительной защиты Описание СимволовЭлектрическая Безопасность II Технические характеристикиIII- Инструкции по безопасности Рабочее МестоСервис 21 RUГого зарядного устройства, кроме того, что входит в комплект При работе с инструментом всегда испольДЛЯ Продления Жизни Аккумулятора 23 RUИспользование Аккумулятора Зарядка АккумуляторовViii Работа Сверление 25 RUБыстрозажимной Патрон Регулируемая Боковая РукояткаЗамена Зажимного Патрона ГарантияIX Уход ПримечанияСглобяване СъдържаниеВъведение РазопакованеОписание НА Символите II Техническа спецификация III Инструкции за безопасност29 BG Сервиз Експлоатация И Грижа ЗА ЕлектроинструментаАко при пробивната операция се произвеж Да прах Или менгеме, за да обездвижите обработ- вания материалВНИМАНИЕ! Батериите ще са напълно заре VI ДопълнителниПоставяне И Изваждане НА Комплекта Батерии Зареждане НА БатериитеLED Светлини Viii Начин на употреба33 BG Индикатор НА БатериятаМонтаж И Демонтаж НА Свредлата Режими НА ПробиванеПозиции НА Регулатора НА ВЪРТЯ- ЩИЯ Момент Двускоростна ПредставкаСмяна НА Патронника ПробиванеПочистване VII ПоддръжкаViii Гаранция Забележки0603R03 0603R03 0603R03 0603R03

BUR 15E specifications

The Sparky Group BUR 15E is an innovative power tool designed for both professional and home use, tailored to meet the needs of various users in the construction, renovation, and DIY sectors. This versatile tool combines advanced technology with user-friendly features that make it a top choice for those requiring efficient and effective performance.

One of the main features of the BUR 15E is its powerful 1,500-watt motor, which delivers an impressive performance across a range of applications. This strong motor ensures that the tool offers high torque and speed, enabling users to tackle tough jobs with ease, from drilling to chiseling. The BUR 15E comes equipped with variable speed control, allowing users to adjust the speed according to the material being worked on, thus ensuring optimal results and preventing damage to workpieces.

The design of the Sparky Group BUR 15E prioritizes user comfort and safety. Its ergonomic handle provides a secure grip, reducing fatigue during extended use. Additionally, the tool features a robust safety system that includes an automatic shutdown function in case of overheating, protecting both the user and the tool itself.

Technologically, the BUR 15E utilizes an innovative electronic speed control system that maintains a consistent speed under load, ensuring the quality of work remains high even on challenging tasks. The inclusion of a built-in electronic clutch prevents over-tightening and protects the user from potential kickback, further enhancing its safety profile.

Another significant characteristic of the BUR 15E is its versatility. The tool is compatible with a wide range of accessories and attachments, making it suitable for various applications such as drilling, hammer drilling, and chiseling. This adaptability makes it an ideal choice for users who need a flexible solution for different projects.

The Sparky Group BUR 15E also boasts a durable construction, designed to withstand the rigors of frequent use in demanding environments. Its high-quality materials ensure longevity, making it a worthwhile investment for professionals and DIY enthusiasts alike.

In conclusion, the Sparky Group BUR 15E stands out as a powerful and reliable tool that combines advanced technology with essential features aimed at enhancing user experience. With its potent motor, ergonomic design, electronic controls, and versatility, it is well-equipped to handle a myriad of tasks with efficiency and precision, making it a valuable addition to any toolkit.