Porter-Cable N039112 instruction manual Overload Protection

PROBLEM	CAUSE	CORRECTION
Motor will not run.	Fuse blown, circuit	Check fuse box
	breaker tripped.	for blown fuse and
		replace as necessary.
		Reset circuit breaker.
		Do not use a fuse or
		circuit breaker with
		higher rating than
		that specified for your
		particular branch circuit.
		Check for proper
		fuse. You should use
		a time delay fuse.
		Check for low
		voltage problem.
		Check the
		extension cord.
		Disconnect the other
		electrical appliances
		from circuit or operate
		the compressor on its
		own branch circuit.
	Extension cord is wrong	Check the
	length or gauge.	extension cord.
	Loose electrical	Check wiring connection
	connections.	inside terminal box.
	Faulty motor.	Have checked by
		a Trained Service
		Technician.
	Motor overload	Refer to Motor
	protection switch	Overload Protection
	has tripped	under Operation.
		If motor overload
		protection trips
		frequently, contact
		a Trained Service
		Technician

18 - ENG