Global Machinery Company LJS750CF manual Use safety equipment. Always wear eye protection

Page 5

f.If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool.

Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices

can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job

5

 

 

 

 

 

 

 

 

 

 

 

 

 

better and safer at the rate for which it was designed.

 

 

b. Do not use the power tool if the switch does not turn

 

 

it on and off. Any power tool that cannot be controlled

 

 

with the switch is dangerous and must be repaired.

 

 

c. Disconnect the plug from the power source before

 

 

making any adjustments, changing accessories, or

 

 

storing power tools. Such preventive safety measures

 

 

reduce the risk of starting the power tool accidentally.

 

 

GB

d. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

 

 

or these instructions to operate the power tool. Power

 

 

tools are dangerous in the hands of untrained users.

 

 

e. Always unplug your power tool when leaving

 

 

unattended. Such preventative safety measures

 

 

reduce the risk of starting the power tool accidentally

 

 

by untrained users.

 

 

f. Maintain power tools. Check for misalignment or

 

 

binding of moving parts, breakage of parts and

 

 

any other condition that may affect the power tools

 

 

operation. If damaged, have the power tool repaired

 

 

before use. Many accidents are caused by poorly

 

 

maintained power tools.

 

 

g. Keep cutting tools sharp and clean. Properly

 

 

maintained cutting tools with sharp cutting edges are

 

 

less likely to bind and are easier to control.

 

 

h. Use the power tool, accessories and tool bits etc.,

 

 

in accordance with these instructions and in the

 

 

manner intended for the particular type of power

 

 

tool, taking into account the working conditions and

 

 

the work to be performed. Use of the power tool for

 

 

operations different from those intended could result in

 

 

a hazardous situation.

 

 

5. Service

 

 

a. Have your power tool serviced by a qualified repair

 

 

person using only identical replacement parts.

 

 

This will ensure that the safety of the power tool is maintained.

 

 

LJS750CF IM ed3.indd 5

4/8/09 14:49:05

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 750W Carbon Fibre Pendulum Action Jigsaw Contents Specifications Description of symbolsEnvironmental Protection Declaration Of ConformityElectrical safety Safety rules for laser lightsDo not expose power tools to rain or wet conditions Save all warnings and instructions for future referenceBetter and safer at the rate for which it was designed Use safety equipment. Always wear eye protectionPower tool use and care Contents of carton Additional safety rules for jigsawsAssembly Unpacking112 5 Know your productSwitching the jigsaw on/off Adjusting the shoe for angular cuttingAdjusting the cutting speed Pendulum adjustmentPocket & round cutting Making a cutCutting metal Parallel fenceMaintenance Using the GMC laser guide systemDust extraction adaptor Blade storageGeneral inspection Power cord maintenanceAankoopgegevens Datum van aankoop Model Serienummer IntroductieGarantie Eg-Verklaring van Overeenstemming Bescherming Van Het MilieuSpecificaties De Gegevens van het lawaai en van de TrillingWanneer u elektrisch gereedschap buiten gebruikt Veiligheidsregels voor laserlichtAlgemene veiligheidsregels LJS750CF IM ed3.indd Inhoud van de verpakking Aanvullende veiligheidsregels voor decoupeerzagenUitpakken MontageKen uw product De decoupeerzaag aan/uitschakelen De voetplaat instellen voor hoekzagenDe zaagsnelheid instellen Instellen pendelenGat- en rondzagen Een zaagsnede makenMetaal zagen ParallelgeleiderOpbergruimte zaagblad StofafvoeradapterHet GMC lasergeleidingssysteem gebruiken OnderhoudAlgemene controle Onderhoud elektriciteitssnoerDate d’achat Modèle Numéro de série Informations sur votre achatProtection De L’environnement Description des symbolesSpécifications Déclaration de Conformité CELorsque vous utilisez un outil électrique à l’extérieur Consignes de sécurité pour les lumières laserConsignes générales de sécurité ’utilisez pas l’outil électrique si le bouton de marche Déballage Contenu du cartonKnow your product Mise en marche/arrêt de la scie sauteuse Réglage de la semelle pour une coupe d’angleRéglage de la vitesse de coupe Réglage du mouvement pendulaireCoupe intérieure & arrondie Réalisation d’une coupeCoupe de métal Guide parallèleStockage de lame Adaptateur d’extraction de la poussièreUtilisation du système de guidage laser GMC EntretienVérification générale Maintenance du cordon électriqueKaufdatum Modell Seriennummerr EinführungKaufinformation Umweltschutz Beschreibung der SymboleKonformitätserklärung SpezifikationenAllgemeine Sicherheitsvorschriften Sicherheitsvorschriften für LaserlampenLJS750CF IM ed3.indd Kartoninhalt Zusätzliche Sicherheitsvorschriften für StichsägenAuspacken des Schleifers ZusammenbauProduktbeschreibung Ein-/Ausschalten der Stichsäge Schuheinstellung für WinkelschnittEinstellen der Sägegeschwindigkeit PendelhebelTaschen- & Rundschnitt SägenMetallsägen ParallelanschlagSägeblattaufbewahrung StaubabzugsadapterVerwenden des GMC Laserführungssystems WartungAllgemeine Inspektion Instandhaltung des StromkabelsGaranzia IntroduzioneInformazioni sull’acquisto Data di acquisto Modello N Numero di serieEC Dechiarazione di Confirmitá Protezione AmbientaleCaratteristiche tecniche VibrazioneNormas generales de seguridad Normas de seguridad para las luces láserEléctricas son peligrosas en manos de usuarios noI formados Contenido de la caja Normas de seguridad adicionales para las sierras de vaivénDesembalaje MontajeConozca su producto Conexión / desconexión de la sierra de vaivén Ajuste de la zapata para corte angularAjuste de la velocidad de corte Ajuste del pénduloCortes de alvéolos y redondos Realización de un corteCorte de metal Guía paralelaAlmacenamiento de las hojas Adaptador de extracción de polvoUtilización del sistema de guía de láser GMC MantenimientoInspección general Mantenimiento del cable eléctricoRegistro de compra Fecha de compra Modelo Número de serie IntroducciónGarantía Descripción de los símbolos Protección MedioambientalDeclaración CE de Conformidad EspecificacionesNorme generali di sicurezza Norme di sicurezza specifiche per le luci laserSicurezza dell’utensile elettrico Disimballaggio Norme di sicurezza specifiche per i seghettiContenuto della confezione Descrizione Accensione e spegnimento del seghetto Regolazione della piastra base per i tagli angolariRegolazione della velocità di taglio Regolazione del movimento pendolareTagli circolari e a tasca TaglioTaglio di materiali metallici Guida parallelaConservazione delle lame Collettore di aspirazioneUso del sistema di precisione laser GMC ManutenzioneIspezione generale Manutenzione del cavo di alimentazioneLJS750CF IM ed3.indd LJS750CF IM ed3.indd LJS750CF IM ed3.indd

LJS750CF specifications

Global Machinery Company has established itself as a leader in the heavy equipment industry, offering innovative solutions that cater to various sectors. One of their standout products is the LJS750CF, a versatile machine that has garnered attention for its robust functionality and advanced features.

The LJS750CF is designed for efficiency and ease of use in construction, mining, and industrial applications. Its powerful yet fuel-efficient engine ensures optimal performance while minimizing operational costs. The machine's output is impressive, with a reliable horsepower rating that enables it to tackle demanding tasks with ease.

Among the defining characteristics of the LJS750CF is its cutting-edge hydraulic system. This configuration allows for precise control and responsiveness, making it suitable for tasks that require finesse and accuracy. The hydraulic system is complemented by a user-friendly interface, giving operators a seamless experience while managing complex processes.

The LJS750CF is also equipped with a state-of-the-art tracking system. This technology enhances the machine's stability, ensuring that it remains balanced during operation, regardless of the terrain. Moreover, the machine features advanced safety mechanisms, including automatic shut-off and pressure monitoring systems, which protect both the equipment and its operator.

Durability is another hallmark of the LJS750CF. Built with high-grade materials, the machine is designed to withstand harsh working conditions, ensuring longevity and a low total cost of ownership. The parts are also easily accessible, making maintenance straightforward and timely, which further extends the lifespan of the equipment.

In terms of mobility, the LJS750CF boasts a compact design that facilitates transportation to various job sites. Its lightweight construction does not compromise strength, making it an ideal choice for businesses that require flexibility without sacrificing performance.

Moreover, the LJS750CF is environmentally conscious, incorporating technologies that reduce emissions and fuel consumption. This aligns with Global Machinery Company's commitment to sustainability and responsible manufacturing.

In conclusion, the LJS750CF by Global Machinery Company stands out for its powerful performance, advanced features, and commitment to durability and safety. It represents a significant investment for any business seeking reliable and efficient machinery to meet their operational needs. With the LJS750CF, operators can expect not only enhanced productivity but also a greater sense of operational ease and safety on the job site.
Top Page Image Contents