Emerson AC4 user manual Back Up the Configuration File

System and Control Options

Back Up the Configuration File

8.At the prompt to Initiate a Backup of Configuration File, enter Y (Yes - begin) or N (No - cancel). The current setting appears in brackets—[N] in the following example.

>INITIATE A BACKUP OF CONFIGURATION FILE-YES(Y) OR NO(N)? >[N]

>[

NOTE

The following instructions refer to the Microsoft Windows HyperTerminal program. These steps may vary for other communications programs.

9. At the top of the HyperTerminal window, shown below, click on Transfer, then on Receive File.

Enter folder

Select

Xmodem

Enter filename - for example, AC4_CONF.SAV

10.In the Receive File window, as shown above:

•In the Place Received File in the Following Folder box, enter the name and location of the folder where the configuration file should be placed—for example, C:\downloads—or click on the Browse button to locate the folder.

•In the Use Receiving Protocol box, select Xmodem from the drop-down list.

•Click on the Receive button. (To close the window without backing up the file, click on Close or Cancel.)

11.In the Receive Filename window, enter a name for the file—for example, AC4_CONF.SAV.

12.When the transfer is complete, a confirmation message appears in the Service Terminal Interface window: “Backup Successful.”

39 Liebert® AC4™