Baldor MN735 manual Analog Output

	Table 4-1		Parameter Definitions Continued
Display	Parameter	Description				Range	Factory
							Setting
			SET::IN Menu Continued
	DIN 1 VALUE	The input signal after inversion (if any).				0= False	0
	~					1= True
	DIN 2 VALUE	The input signal after inversion (if any).				0= False	0
	~					1= True
	DIN 3 VALUE	The input signal after inversion (if any).				0= False	0
	~					1= True
	DIN 4 VALUE	The input signal after inversion (if any).				0= False	0
	~					1= True
	AIN 1 VALUE	The analog input signal with scaling and offset.				x.x%	x.x%
	~
	AIN 2 VALUE	The analog input signal with scaling and offset.				x.x%	x.x%
	~
			SET::OUT Menu
	AOUT 1	ANALOG OUTPUT				0= NONE	1
	SOURCE					1= DEMAND
		0 NONE		Scale		2= CURRENT
		1 DEMAND %				3= PI ERROR
				Offset
		2 CURRENT %			0–10V
		3 PI ERROR %		Absolute		4= RAISE/LOWER
		4 RAISE/LOWER				OUTPUT
		OUTPUT%
	AOUT 1 SCALE		SCALE	OFFSET	ABS	-300.0 to 300.0	100.0%
		Value	X	+	X Output
	AOUT 1					-300.0 to 300.0%	0.00%
	OFFSET
	AOUT 1					0= False	0
	ABSOLUTE					1= True
	AOUT 1 VALUE					-300.0 to 300.0%	0.0%
	~
	DOUT 2	DIN4 / DOUT2				0= NONE (DIN4)	0
	SOURCE	0 NONE				1= HEALTH
		1 HEALTH				2= TRIPPED
		2 TRIPPED		Invert		3= RUNNING
		3 RUNNING
				Output		4= AT ZERO
		4 AT ZERO
						5= AT SPEED
		5 AT SPEED
		6 AT LOAD				6= AT LOAD
	DOUT 2	(OUTPUT) As SIP01. Set to 0 for applications				As SIP01	0
	INVERT	1 & 5.
	DOUT 2	The output signal that represents the OP21				0= False	0
	VALUE ~	choice.				1= True

RELAY	RELAY
SOURCE	0 NONE
	1	HEALTH
	2	TRIPPED
	3	RUNNING
	4	AT ZERO
	5	AT SPEED
	6	AT LOAD

Invert Output

0= NONE 2

1= HEALTH 2= TRIPPED 3= RUNNING 4= AT ZERO 5= AT SPEED 6= AT LOAD

MN735 Start–Up and Operation 4–9