AEG TKS-CS Insufficient ventilation of equipment, Heat generation in resistors

Page 26

Compact Station TKS-CS - Operating Instructions

ATTENTION

Insufficient ventilation of equipment

Equipment may overheat.

Keep air vents clear.

Ensure the equipment is sufficiently ventilated.

WARNING

Heat generation in resistors

Risk of burning.

Do not touch hot components.

WARNING

Hinge side of the door when closing

Fingers or hands may be crushed.

Do not hold the hinge side of the door.

Take care while closing the cabinet door.

WARNING

Entry of water into electrical equipment

Risk to life due to electric shock.

Do not use water to clean the cabinets.

Do not place any vessels containing fluids (beverage cups, for example) on electrical equipment.

5 safety rules

1.Disconnect safely.

2.Secure the equipment against being switched back on.

3.Verify that all poles are de-energised.

4.Earth the equipment, close the earthing switch and short- circuit the equipment.

5.Provide protection in the form of covers or barriers for any neighbouring live parts.

iA safe disconnection certificate or a release certificate according to DIN VDE 0105-100 (EN 50110) must be presented prior to all maintenance and repair work.

	i	The owner must draw up a safe disconnection procedure and
		The owner must draw up a safe disconnection procedure and
		brief personnel on this.


Page 26 of 39		8000043213 BAL

Image 26

Contents TKS-CS Revision Service Status Revision Date NameTable of Contents Decommissioning and Dismantling Mailservice.aegpss@aegps.com Appropriate Use General InformationValidity List of AbbreviationsLightning Protection SafetyInstallation Location Scope of Delivery Available to orderEquipment Specifications StructureLow-Voltage Box DimensionsDimension AC Connections Low-voltage boxes exampleISO Small Distribution Box Communications Cabinet PV LoG-MH Central Earthing SystemMedium-Voltage System No. H07V-KNameTransformer 3 4 5 4Functional Description Transfer stationTransport Suspended loads during transportAssembly Setting in PlaceConnection Design Torque InstallationHinge side of the door when closing Communication Interface PV.LoG-MH Medium-voltage system example Medium-Voltage Transformer Tightening Torques for Screw Connections Working with voltages up to 1 kV Start-upOperation Residual voltage from capacitors ServicingContact with voltage Contact with leakage currentEntry of water into electrical equipment Insufficient ventilation of equipmentHeat generation in resistors Obligation to Keep a Written Record Maintenance and Inspection Visual Inspection CleaningTesting/Measuring Functional TestRotating parts Care LubricationReplacing the Axial Ventilator Repairs Testing after RepairsReplacement Work Replacing the Transformer Roof structure Station frame Station roofReplacing the MV Switchgear Partial top view TKS-CS exampleMonthly Maintenance ScheduleOngoing Every 6 monthsEvery 2 years Storing Spare PartsAnnually Every 4 yearsDismantling Decommissioning and DismantlingRemoving Connection Cables Disposal Statutory Provisions Chemical System ComponentsCompact Station TKS-CS Operating Instructions List of Tables List of Figures