Atlas Air Compressor Quick look at actual compressor status, Calling up other menus, Procedure

Page 44

Instruction book

8.1.3 Calling up other menus

Starting from the Main screen:

-Use the ↓ key for a quick look at the actual compressor status (see section 8.2)

-Press the key "Menu" (F1), the option "Status data" will be followed by a horizontal arrow:

-either press the tabulator key (5) to select this menu

-or use the ↓ key to scroll until the desired submenu is followed by a horizontal arrow and then press the tabulator key (5) to select this menu

8.2 Quick look at actual compressor status

Procedure

1.Starting from the Main screen (see section 8.1.2), press the ↓ key: A screen similar to the one below appears:

Automatic Operation
Local Control
Week Timer Active		↓
Mainscreen	Help	Extra
F1	F2	F3

Fig. 8.4 Example of an actual compressor status display

Line 1 indicates the automatic or manual operation status of the regulator:

"Automatic operation" means that the regulator automatically adapts the operation of the compressor, i.e. starting and stopping the compressor modules according to the programmed parameters.

Line 2 indicates whether the regulator operates in local control, remote control or LAN control mode:

"Local control" means that the start/stop buttons on the keyboard are activated.

"Remote control" means that these functions are controlled remotely. Consult Atlas Copco. “LAN control” means that the compressor can be controlled by an ES controller.

Line 3 indicates whether the timer, which generates time-based start and stop commands is activated or not. See section 8.11.

See section 1.5.7 for the functions of the keys "Mainscreen", "Help" and "Extra".

2.Press the ↓ key to get other data (actual compressor conditions of the compressor) as shown in Fig. 8.1.

2920 1521 00

44

Image 44

Contents Instruction book No 1521 Registration code APC SF / 38Instruction book Skid Tank-mounted Twin Service warning message exists Leading Particulars General descriptionSF4 Skid Control panel Air outlet valve SF4 Tank-mounted SF8FF Multi Details of a compressor module on SF Tank-mounted Air flow Cooling and condensate drain systems FigRegulating system on SF Skid Tank-mounted Twin Protecting the compressorMonitoring components subject to service Regulating system on SF MultiControlling the compressor Automatic restart after voltage failureControl panel Fig Designation FunctionDisplay keys Operating condition of a compressor moduleScroll keys 3-Fig Tabulator key 4-FigSelecting a menu 13 Menu flow, SF MultiElectric cabinet on SF Multi 14 Electric cabinets, SF MultiRefrigerant circuit Air dryer on SF Full-Feature FigCompressed air circuit Installation Dimension drawings Figs .1 up to9820 4054 00/1 Dimension drawing, SF 6-8 Multi Dimension drawing, SF 11-15 Multi Instruction book Installation proposal Fig Instruction book Connections Skid Tank-mounted Twin Electrical connectionsGeneral SF Multi TSHH20 Pictographs PictographsStarting Operating InstructionsInitial start-up Stopping Taking out of operation at end of compressor service lifeDuring operation Maintenance Preventive maintenance schedule for the compressorBefore carrying out any maintenance or repair Service plans on SF MultiMonthly YearlyAdjustments and Servicing Procedures Air filter 1-Figs .7/1.8Belt exchange/tensioning Fig CoolersOperating Safety valveTesting Problem Solving Electric cable size for SF 6-15 Multi Principal DataElectric cable size for SF1-8 Overload relays for SF1-8 Overload relays for SF6-15 MultiMain fuses for SF1-8 Main fuses for SF6-15 MultiReference conditions/limitations Reference conditionsSF1-4 8bar 50 Hz SF2-4 10 bar 50 Hz10 SF1-4 100 psi 60 Hz 11 SF2-4 145 psi 60 Hz14 SF6-15 Multi 100 psi 60 Hz 12 SF6-15 Multi 8 bar 50 Hz13 SF6-15 Multi 10 bar 50 Hz 15 SF6-15 Multi 125 psi 60 Hz 16 SF6-15 Multi 145 psi 60 HzSF11 SF15 125 psi SF11 SF15 145 psiRegulator Functions for SF Multi Menu-driven control programsFunction of control programs Program/Function Description Main screenLine Indicates Remarks Element status screen, typical exampleCalling up other menus ProcedureQuick look at actual compressor status Shut-down message exists Status data menuNo message exists Shut-down reset Service warning message exists Measured data menuCounters menu Test menuModify parameters menu Modifying parametersModifying the pressure bands Modifying protection settings Checking protections for compressor modulesModifying service plans Service plansService actions according to Programmed service plan intervals Service plans IntervalsResulting service actions to be carried out Programming start/stop/pressure band commands Programming Clock functionInstruction book To activate/deactivate the timer To modify a commandInstruction book Adding a command between two existing commands To delete commandsConfiguration menu Deleting all commandsDeleting all commands related to a specific day Deleting a specific start/stop/pressure band commandService menu Service plans ABI Saved data menu Programmable settings Regulation settings Minimum Nominal Maximum SettingService settings Minimum Nominal Maximum Setting Conversion List of SI Units Into US/BRITISH UnitsOverall Rating Components subject to 97/23/EC Pressure Equipment DirectivePart number Description PED Class Instruction book Instruction book Wnership Data Safety Preca Utions