Atlas Air Compressor manual Status data menu, No message exists, Shut-down message exists

Instruction book

8.3 Status data menu

The status data submenu gives information regarding the status of the compressor protection functions (shut-down, service warning and warning) and allows resetting of a shut-down and service condition.

Procedure

Starting from the Main screen (see section 8.1.2):

-Press the key "Menu" (F1), the option "Status data" will be followed by a horizontal arrow

-Press the tabulator key (5)

8.3.1 No message exists

In this case, LED (7) is out and the message on the display indicates that all conditions are normal (Fig. 8.5):

All Conditions are OK
Menu	Help
F1	F2	F3

Fig. 8.5 Example of a status data screen

8.3.2 A shut-down message exists

In case the compressor is shut down, LED (7) will blink. A shut-down message exists after an emergency stop or after the temperature switch (TSHH20-Fig.2.8) has tripped (indicated on the display as Aux. Equipment Overload).

In case of a shut-down due to an emergency stop, a screen similar to the one below will appear:

Emergency Stop			Open
Shutdown		Open
Menu	***	***	Reset
F1		F2	F3

Fig. 8.6 Example of a status data screen

1.The indicators (***) are blinking. The screen shows that the compressor is shut down due to an emergency stop. The contacts of the emergency switch are open. The setting of the shut-down is open.

2920 1521 00 45