Atlas Air Compressor manual Measured data menu, Service warning message exists

Page 47

Instruction book

8.3.4 A service warning message exists

1. LED (7) is alight and the main screen will change into a screen similar to that shown in Fig. 8.9.

Compressor Outlet			7.0 bar
**		Service Required	**↓
Menu	***	***	- - - -
F1		F2	F3

Fig. 8.9 Example of a service warning screen

2.The indicators (***) are blinking and the service warning message appears alternately with the messages indicating whether the compressor is in operation or not (Compressor Running or Compressor Off).

3.Press the key "Menu" (F1) and the tabulator key (5) to select the Status data menu: the option "Service" is blinking.

4.Scroll to this option and select it by pressing the tabulator key (5), two options may blink: "Inputs": option is not applicable.

"Plan": if a service plan interval is exceeded. See section 8.15.2.

5.Stop the compressor and switch off the voltage.

6.The service message was referring to "Plan": carry out the service actions related to the indicated plans. Reset the timers of the related plans as described in section 8.13.

8.4 Measured data menu

Function

To call up information regarding the actually measured data and the status of some inputs such as the motor overload protection per compressor module.

Procedure

1.Starting from the Main screen (see section 8.1.2):

-press the key "Menu" (F1)

-press the ↓ key until the option "Measured data" is followed by a horizontal arrow

-press the tabulator key (5) to activate the menu

Compressor Outlet		7.0 bar	┤
Element 1		75 °C
Element 2		70 °C	↓
Menu		Extra
F1	F2	F3

Fig. 8.10 Example of a measured data screen

2920 1521 00

47

Image 47

Contents No 1521 Registration code APC SF / 38 Instruction bookInstruction book Skid Tank-mounted Twin Service warning message exists General description Leading ParticularsSF4 Skid Control panel Air outlet valve SF4 Tank-mounted SF8FF Multi Details of a compressor module on SF Tank-mounted Cooling and condensate drain systems Fig Air flowProtecting the compressor Regulating system on SF Skid Tank-mounted TwinAutomatic restart after voltage failure Monitoring components subject to serviceRegulating system on SF Multi Controlling the compressorDesignation Function Control panel FigTabulator key 4-Fig Display keysOperating condition of a compressor module Scroll keys 3-Fig13 Menu flow, SF Multi Selecting a menu14 Electric cabinets, SF Multi Electric cabinet on SF MultiRefrigerant circuit Air dryer on SF Full-Feature FigCompressed air circuit Dimension drawings Figs .1 up to Installation9820 4054 00/1 Dimension drawing, SF 6-8 Multi Dimension drawing, SF 11-15 Multi Instruction book Installation proposal Fig Instruction book Connections Skid Tank-mounted Twin Electrical connectionsGeneral SF Multi TSHH20 Pictographs PictographsStarting Operating InstructionsInitial start-up Stopping Taking out of operation at end of compressor service lifeDuring operation Service plans on SF Multi MaintenancePreventive maintenance schedule for the compressor Before carrying out any maintenance or repairYearly MonthlyCoolers Adjustments and Servicing ProceduresAir filter 1-Figs .7/1.8 Belt exchange/tensioning FigOperating Safety valveTesting Problem Solving Electric cable size for SF 6-15 Multi Principal DataElectric cable size for SF1-8 Overload relays for SF6-15 Multi Overload relays for SF1-8Reference conditions Main fuses for SF1-8Main fuses for SF6-15 Multi Reference conditions/limitations11 SF2-4 145 psi 60 Hz SF1-4 8bar 50 HzSF2-4 10 bar 50 Hz 10 SF1-4 100 psi 60 Hz14 SF6-15 Multi 100 psi 60 Hz 12 SF6-15 Multi 8 bar 50 Hz13 SF6-15 Multi 10 bar 50 Hz SF11 SF15 145 psi 15 SF6-15 Multi 125 psi 60 Hz16 SF6-15 Multi 145 psi 60 Hz SF11 SF15 125 psiMenu-driven control programs Regulator Functions for SF MultiMain screen Function of control programs Program/Function DescriptionElement status screen, typical example Line Indicates Remarks Calling up other menus Procedure Quick look at actual compressor status Shut-down message exists Status data menuNo message exists Shut-down reset Measured data menu Service warning message existsTest menu Counters menuModifying parameters Modify parameters menuModifying the pressure bands Checking protections for compressor modules Modifying protection settingsService plans Modifying service plansService actions according to Programmed service plan intervals Service plans IntervalsResulting service actions to be carried out Programming Clock function Programming start/stop/pressure band commandsInstruction book To modify a command To activate/deactivate the timerInstruction book To delete commands Adding a command between two existing commandsDeleting a specific start/stop/pressure band command Configuration menuDeleting all commands Deleting all commands related to a specific dayService menu Service plans ABI Saved data menu Regulation settings Minimum Nominal Maximum Setting Programmable settingsConversion List of SI Units Into US/BRITISH Units Service settings Minimum Nominal Maximum SettingOverall Rating Components subject to 97/23/EC Pressure Equipment DirectivePart number Description PED Class Instruction book Instruction book Wnership Data Safety Preca Utions