Atlas Air Compressor manual Modifying service plans, Service plans

Instruction book

8.9.2 Modifying protections for Dryer LAT on Full-Feature machines

1. Consult the section above to select the parameter Dryer LAT (Low Ambient Temperature):

Dryer LAT		10 °C	→
Warning	Maximum	25 °C
			↓
Back	Modify
F1	F2	F3

Fig. 8.14 Modify parameters menu

2.The screen shows that the Dryer LAT is 10 °C and that the shut-down setting is 25 °C. To modify this setting, press the key "Modify" (F2):

Dryer LAT		10 °C
Warning	Maximum	25 °C
Program	Limits	Cancel
F1	F2	F3

Fig. 8.15 Modify parameters menu

3.The key "Limits" (F2) can be used to find the limitations for the parameter. Use the ↓ or ↑ arrow key to change the value.

4.Press the key "Program" (F1) to program the new setting or the key "Cancel" (F3) to cancel the modification operation.

Note:

The modifying procedure for other settings is similar. For some settings, a delay can be programmed. See section 8.15.

8.10 Modifying service plans

Function

To modify the hour intervals for the Service plans.

Service plans

The service operations to be carried out are grouped in plans, called Service plan A, B, D or I. When reaching an interval, a message will appear on the screen indicating which Service plans are to be carried out.

2920 1521 00 52