Bosch Power Tools 3924B manual Unpacking and Checking Contents, Installation of Miter Lock Knob

! WARNING

Assembly

Unpacking and Checking

Contents

FIG. 1

! CAUTION	Before moving the saw: Lock the miter
	lock knob in 45° left or right position. Lock

bevel lock handle. Lock head assembly in the down position.

Never carry the tool by the power switch handle.

Model 3924 Compound Miter Saw is shipped complete in one box.

1.Separate all parts from packing materials and check each one with the “Table of Loose Parts” to make sure all items are accounted for before discarding any packing material.

2.Loose parts:

•Quick Action Clamp - Used to clamp work-pieces.

•6 mm Hex Wrench - Stored in the base.

•3 mm Hex Wrench - Stored in the handle.

•Blade Wrench - Stored in the handle.

•Miter Lock Knob

•Dust Bag

•24 V Battery Pack (2) (Not included with model 3924B)

•Charger (Not included with model 3924B)

•Operating/Safety Instructions

If any parts are missing, do not turn the switch on until the missing parts are

obtained and are installed correctly.

Installation of Miter Lock Knob

1.Locate Miter Lock Knob from Loose Parts.

2.Assemble Miter Lock Knob into front of Table as shown (Figure 1).

Do Not Over Tighten

28