Features

PRODUCT SPECIFICATIONS

Chuck	1/2 in. Keyless	Clutch	24 position
Motor	18 Volt DC	Torque		330 in.lb.
Switch	Variable Speed	Hammer Speed	0-5,200/0-19,500 BPM*
No Load Speed	0-400/0-1,500 r/min. (RPM)	*Blows Per Minute

KNOW YOUR HAMMER DRILL

See Figure 1, page 13.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

Auxiliary Handle

Your drill is equipped with an auxiliary handle for ease of operation and to prevent loss of control.

BIT STORAGE

Bits provided with the drill can be placed in the storage area, located on the base of the drill.

BLOWS PER MINUTE

This tool features an impact speed of 0-5,200/0-19,500 BPM (Blows Per Minute). Blows Per Minute is the number of impacts per minute.

DEPTH STOP ROD

A depth stop rod has been supplied with this product to assist in controlling the depth of drilled holes.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/center lock)

Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.

KEYLESS CHUCK

The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.

LEVEL drilling

A level is located on the top of the hammer drill. It can be used to keep drill bits level during horizontal drilling operations.

MAGTRAY™

The magnetic tray conveniently stores screws or other small parts.

QUICK MODE SELECTOR

The Quick Mode Selector allows you to quickly switch from drive mode to drill mode.

TORQUE ADJUSTMENT RING

Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for the application.

TWO-SPEED GEAR TRAIN

The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of the drill for selecting either LO (1) or HI (2) speed.

VARIABLE SPEED

The switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

6 — English