Cabletron Systems TRMMIM manual Setting the Map Poll Interval, Device Information Window

Ring Map

Figure 3-9. The Device Information Window

Setting the Map Poll Interval

You can set the poll interval that controls how often the monitored hub is queried for changes in the selected ring’s station list. The poll interval is also used to update the error and performance information that is returned in the Ring Map’s associated windows.

To set the poll interval:

1.Click on at the top of the Ring Map window.

2.Drag down to Set Polling Interval, and release. The Set Polling Interval window, Figure 3-10, will appear.

Figure 3-10. Set Polling Interval Window

3.In the Enter Interval field, type in the number of seconds you desire between polls from your management station to the monitored hub. The poll interval you enter must be at least 10 seconds; the default is 20 seconds.

4.Click on to accept the interval or to exit without changing the interval.

Note that the next time the Ring Map application is started, the poll interval will reset to its default value of 20 seconds.

3-20 Viewing Ring-level Information