Cabletron Systems TRMMIM manual Module and Port, Stn Name, Upstream Addr, Downstream Addr

Page 93

Statistics

Figure 5-2. Ring and Station Statistics Window

The Ring and Station Statistics window lists each active station on the ring; the following information is provided for each station:

MAC Address

Displays the station’s MAC or hardware address. MAC addresses are usually factory set and cannot be changed. (The MAC address will be displayed in Token Ring format.)

Module and Port

Provides the station’s location in the MMAC chassis by module and port number. If module and port equal 0, the station is not physically connected to the monitored device (e.g., it is connected via a ring in or ring out port).

Vendor

Displays the name of the station’s manufacturer.

Stn Name

Displays the name assigned to the station.

Upstream Addr

Displays the MAC or physical address of the station’s nearest active upstream neighbor (NAUN).

Downstream Addr

Displays the MAC or physical address of the station’s downstream neighbor.

Viewing the Ring Station List

5-3

Image 93

Contents Trmmim Page Virus Disclaimer Applicable to licenses to the United States Government only Restricted Rights NoticeContents Chapter Alarm Conﬁguration Chapter Ring MapChapter Statistics Appendix a Trmmim MIB Structure Chapter Ring Security ConﬁgurationContents Trmmim Using the Trmmim User’s GuideIntroduction to Spma for the Trmmim What’s not in the Trmmim GuideScreen Displays ConventionsIntroduction to Spma for the Trmmim Button Using the MouseFTP Getting HelpTrmmim Firmware Introduction to Spma for the Trmmim Trmmim Firmware Using the Hub View Using the Trmmim Hub ViewNavigating Through the Hub View Using the Trmmim Hub ViewTrmmim Hub View Hub View Front PanelTime and Date UptimeDevice Name Device LocationUsing the Trmmim Hub View Using the Mouse in a Hub View Module Module Index FNB Bypass State Port Display Form Hub View Port Color CodesFrames ErrorsTotal Bytes Port TypeFNB Display Monitoring Hub Performance Using the Trmmim Hub View Name and Location Checking Device Status and Updating Front Panel InfoContact Checking Module StatusDate and Time Total RingsSpeed Fault Location Speed FaultModule Name ModuleChecking Port Status Admin StatePort Name Module/PortChecking Station Status Link State TimeInsertion Trap Station Name VendorUpstream Neighbor/Downstream Neighbor Priority Physical LocationPort Mapping Reverse MACsConﬁguring Station Name, Location, or Priority Checking Ring Port StatusMedia Fault Fault State TimeClass Media TypeChecking Statistics Line BytesBurst AbortManaging the Hub Managing the Hub at the Device LevelFind MAC Address 12. The Find MAC Address Window Setting the Polling IntervalsContact Status 13. Trmmim Polling IntervalsDevice Conﬁguration Device General StatusPort Operational State StatisticsControlling Token Ring FNB Multiplexer Connections Managing the Hub at the Module LevelINS Left Connect BoardRight Connect BypassClearing the Module FNB Conﬁguration Window Selections Controlling Token Ring SpeedEnabling All Ports on Token Ring Modules Controlling Token Ring MIM Management ModeAuto AUT Management MGTManaging the Hub at the Port Level Converting a Station Port to a Ring-out PortEnabling and Disabling Station and Ring Ports Removing a Station from the Ring Ring Map Launching the Ring Map From the command line stand-alone modeFrom the icon From the Hub ViewRing Name Selecting a Ring to MapRing Map Stations SpeedName UtilizationQuick Info Popup Window Viewing Station-speciﬁc InformationDrop Board and PortPerformance and Errors Setting a Station NameViewing Management Station Conﬁguration Setting a Station DropCommands Open Status Error StatusActive Monitor ErrorSetting the Statistics Calculation Mode Error Report TimerViewing Ring-level Information Set Calculation Mode Window Viewing the Error TableError Table Window Isolating Errors Total ErrorsNon-Isolating Errors Changing the Station Labels Viewing Device Information Device Information Window Setting the Map Poll IntervalActive Monitor Changes Viewing Beacon HistoryRing Purges Beacon EventsLast Beacon Type Longest BeaconLast Beacon Beacon Conﬁguration 12. The Beacon Conﬁguration Window Using the Find Options 13. Sample Find Windows Searching by Station Name, MAC Address, Board/Port, or DropFinding the Active Monitor on the Network Finding the Management Station on the Network Frames or Errors measured/Δ Time in seconds 14. Sample Find Highest and Lowest Windows Accessing Other Spma ApplicationsAlarm Conﬁguration Spmarun e5alarms IP address community name Setting and Viewing Ring Alarms Alarm Conﬁguration Setting a Ring Level Alarm Setting and Viewing Station AlarmsAlarm Conﬁguration Alarm Conﬁguration Alarm Conﬁguration Setting a Station Level Alarm Alarm Conﬁguration Setting and Viewing Station Alarms Statistics Using StatisticsSpmarun e5stats IP Address community name Viewing the Ring Station ListStn Name Module and PortUpstream Addr Downstream AddrUsing the Reverse MAC Button Monitoring Ring and Station StatisticsRefreshing the Station List Creating a Pie Chart Creating a Graph or Meter Click mouse button 1 on General Ring and Station VariablesProtocols KBytesLine Errors Isolating ErrorsBurst Error AC ErrorNon-Isolating Errors Abort ErrorInternal Error Frequency Errors Token ErrorsStatistics Ring and Station Variables About Ring Security Ring Security ConﬁgurationRing Security Conﬁguration Launching the Security Conﬁguration WindowSecurity Conﬁguration Ring Selection window, -1, will appear Allowed Count Allowed Station ListDisallowed Station List Disallowed CountSecurity Mode Options Disable SecurityEnable Security Allowed/Disallowed List Conﬁguration Buttons Building the Allowed List Automatically Conﬁguring SecurityStation Addition Window Deleting Stations from the Allowed or Disallowed ListsClear List Window Clearing All Entries in the Allowed or Disallowed ListRemove Changing the Ring Security ModeTrmmim MIB Structure Ietf MIB SupportProtocol Stack Chassis MGRSnmp Agent Network One, Network TwoTelnet Brief Word About MIB Components and Community NamesTrmmim MIB Structure Index Index-2 Index-3 Index-4