FASTENER DEPTH CONTROL ADJUSTMENT
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
Disconnect tool from air supply before attempting any parts disassembly and before changing the work contacting element adjustment.
Rotate depth control wheel to give the desired depth of drive.
Note: Rotate depth control wheel to give the desired depth of drive.
REMOVING NAILS
LPF21PL
1.Push down on pusher lever
2.Allow pusher spring to pull the pusher forward until it stops in the forward position
3.Slide the nails back to the nail stop
4. Push down on | 5. Slide the nails |
the nail stop | out of the magazine |
7