Vicks PS-0K, PS-3K, PS-1K Welding parameters, Stud Welder BMS-660-90, Stud Welder BMS-690-135

Page 29

R

Initialisation

5.4Welding parameters

The following charging voltages specified in the diagram below are standard values which have been determined in combination with the respective stud welder and the standard Welding Pistol PS-1. AlMg3 and StVK were used as stud material, AlMg3 or St. as base material. The charging voltages vary from the stated setting according to the material type, workpiece thickness and surface condition of the workpiece.

5.4.1 Stud Welder BMS-660-90

Charging voltage (V)

220

200

180

160

140

120

100

80

60

M3	M4	M5	M6	M8
	Stud diameter

SZ.0011.E

5.4.2 Stud Welder BMS-690-135

Charging voltage (V)

220

200

180

160

140

120

100

80

60

M3	M4	M5	M6	M8
	Stud diameter

SZ.0012.E

5-22

Image 29

Contents PS-3K PS-0K PS-1K PS-3K PS-0K PS-1K GmbH Page Table of Contents Maintenance Setting the Stud Welding PistolInitiation Quality controlSpare parts Following should be principally observed General informationIntended use Chapters of Operating Instructions Information on the documentationReaction in the case of malfunctions Information on Operating InstructionsTechnology of tip ignition Description of the Stud Welding PistolsStud Welding Pistol PS-1 Stud Welding Pistol PS-3K Stud Welding Pistol PS-0K PS OMStud Welding Pistol PS-1K PS-1 PS-3K PS-0K PS-1K Technical dataCharacterisation of references in the Operating Instructions Safety instructionsStaff qualification and training Safety-conscious workingFollowing should be observed prior to initiation Safety instructions for the User/OperatorBefore starting welding operations Safety measures at the installation siteIndependent retrofitting and spare parts production Working with the Stud WelderNon-permissible operating modes Setting the Stud Holder Setting the Stud Welding PistolInstalling the stud holder in the Stud Welding Pistol Spring pressure Setting the spring pressureGeneral view InitiationOperation Connecting the Stud Welding Pistols to the Stud WelderStud Welder BMS-690-135 Welding parametersStud Welder BMS-660-90 Stud Welder BMS-8H Stud Welder BMS-6HQuality Control Type and scope of testingGeneral information Demands on the companyNormal work test Implementation of sample takingSimplified work test Production of samplesBending test Tension testReplacing components MaintenanceStud Welding Pistols Spare parts Spare parts list for Stud Welding Pistol PS-1Perspective presentation of Stud Welding Pistol PS-1 Spare parts list for Stud Welding Pistol PS-3K Perspective presentation of Stud Welding Pistol PS-3K Spare parts list for Stud Welding Pistol PS-0K Perspective presentation of Stud Welding Pistol PS-0K Spare parts list for Stud Welding Pistol PS-1K Perspective presentation of Stud Welding Pistol PS-1K Troubleshooting Functional breakdowns Standards and List of Directives Warranty TermsHeinz Soyer Bolzenschweißtechnik GmbH