Vicks PS-0K, PS-3K, PS-1K operating instructions Intended use

Page 9

R

General information

1.2 Intended use

With the SOYER® Stud Welding Pistols PS-1, PS-3K, PS-0K and PS-1K operating with tip ignition, a variety of pins and threaded bolts of steel and stainless steel can be welded (dimensions see Chapter 2.6: “Technical data”). It is also possible to weld fastening elements of brass. The Stud Welding Pistol PS-1 is also suitable for welding aluminium.

The visible side of the workpieces remain to a large extent unaffected by tool drag marks or deformation, so that if thin metal sheets of below 1mm sheet thickness are welded, a decorative appearance will be maintained.

Please contact either our parent company or one of our field engineers if you require consultation or a solution to your problem.

1.3 Information on the product

Manufacturer	Heinz Soyer Bolzenschweißtechnik GmbH
	Etterschlag
	Inninger Straße 14
	D-82237 Wörthsee
	Phone 08153-885-0
	Telefax	08153-8030
	Telex	52700295 heso d
Product designation	Stud Welding Pistol PS-1
	Stud Welding Pistol PS-3K
	Stud Welding Pistol PS-0K
	Stud Welding Pistol PS-1K
Country of origin	Germany

1.4 Serial number

The serial numbers of the Stud Welding Pistols are engraved into the handle.

1-2

Image 9

Contents PS-3K PS-0K PS-1K PS-3K PS-0K PS-1K GmbH Page Table of Contents Maintenance Setting the Stud Welding PistolInitiation Quality controlSpare parts Following should be principally observed General informationIntended use Chapters of Operating Instructions Information on the documentationReaction in the case of malfunctions Information on Operating InstructionsTechnology of tip ignition Description of the Stud Welding PistolsStud Welding Pistol PS-1 Stud Welding Pistol PS-3K Stud Welding Pistol PS-0K PS OMStud Welding Pistol PS-1K PS-1 PS-3K PS-0K PS-1K Technical dataCharacterisation of references in the Operating Instructions Safety instructionsStaff qualification and training Safety-conscious workingFollowing should be observed prior to initiation Safety instructions for the User/OperatorBefore starting welding operations Safety measures at the installation siteIndependent retrofitting and spare parts production Working with the Stud WelderNon-permissible operating modes Setting the Stud Holder Setting the Stud Welding PistolInstalling the stud holder in the Stud Welding Pistol Spring pressure Setting the spring pressureGeneral view InitiationOperation Connecting the Stud Welding Pistols to the Stud WelderWelding parameters Stud Welder BMS-660-90Stud Welder BMS-690-135 Stud Welder BMS-8H Stud Welder BMS-6HQuality Control Type and scope of testingGeneral information Demands on the companyNormal work test Implementation of sample takingSimplified work test Production of samplesBending test Tension testMaintenance Stud Welding PistolsReplacing components Spare parts Spare parts list for Stud Welding Pistol PS-1Perspective presentation of Stud Welding Pistol PS-1 Spare parts list for Stud Welding Pistol PS-3K Perspective presentation of Stud Welding Pistol PS-3K Spare parts list for Stud Welding Pistol PS-0K Perspective presentation of Stud Welding Pistol PS-0K Spare parts list for Stud Welding Pistol PS-1K Perspective presentation of Stud Welding Pistol PS-1K Troubleshooting Functional breakdowns Standards and List of Directives Warranty TermsHeinz Soyer Bolzenschweißtechnik GmbH